Claudia, Often the bootloader sets up the memory configuration registers, because the RAM has to be working before the kernel can use it. So you should check the setup in dBug or whatever bootloader you use to load the kernel.
Good luck, Bill > -----Original Message----- > From: Claudia De Bartolomeis [mailto:[EMAIL PROTECTED] > Sent: Wednesday, November 07, 2007 5:14 AM > To: Gianluca Renzi; [email protected] > Subject: Re: [uClinux-dev] change ram size on m5329evb - Kernel Panic > > > Thanks Gianluca, > but again it doesn't work . > Same log except from the "kernel command line: ..." of course. > > Claudia > > ----- Original Message ----- > From: "Gianluca Renzi" <[EMAIL PROTECTED]> > To: <[email protected]> > Cc: "Claudia De Bartolomeis" <[EMAIL PROTECTED]> > Sent: Wednesday, November 07, 2007 10:13 AM > Subject: Re: [uClinux-dev] change ram size on m5329evb - Kernel Panic > > > > On Wednesday 07 November 2007 09:24, Claudia De Bartolomeis wrote: > >> Thanks Matt, > >> I changhed it, but I have the same log with kernel-panic! > >> So I suppose there is something more to change, > >> but I have no idea what it is. > > just a try: add to kernel command line "mem=64M" (without > quotes ;-) ) and > > let > > see if it works... > > > > Good luck! > > Gianluca > > > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.5.503 / Virus Database: 269.15.23/1114 - Release Date: > > 06/11/2007 20.05 > > > > > > > _______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
