Hi Advan,
--- advan wrote:
> hi, all
> In my embedded platform(station) , I create a
> bridge(br0) by brctl and build a station mode(ath0)
> with madwifi for atheros card and an ethernet
> interface(eth0), then add ath0 and eth0 to br0, it's
> able to connet a AP(cisco). I could ping the embeded
> platform from AP(cisco),but not ping the PC after
> the embedded platform (station), I thought my
> embedded platform didn't forward IP packets to PC .
> otherwsie on PC I also couldn't ping the AP (cisco)
> ,only ping station .
> How to ping PC after the embedded platform
> .please advise and give me clue ,thank you in
> advance
>
> kernel: 2.4.25
> uclibc+busybox
>
> PC --->station AP(cisco)
>
>
What's the output from 'brctl show br0'?
After you attempt to PING the AP from the PC (or
vice-versa), what's the output from 'brctl showmacs
br0'?
What are the IP addresses for each node?
Regards,
...doug
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
