Hi Markus, You can get a BSP here (this for mcf547x_8x): http://www.freescale.com/webapp/sps/site/overview.jsp?nodeId=0127260061033202A9 or by going here: http://www.bitshrine.org/
I believe the kernel is 2.6.10. To the configure the kernel, after the first build run: ./ltib -p kernel -c If you want you should be able to pull out just the kernel sources and cross-toolchain and integrate it to uClinux-dist if that's your preference. Regards, Stuart On Mon, 2007-12-10 at 23:59 +0100, Markus Franke wrote: > Dear uClinux Developers/Users, > > I am wondering whether there is any uClinux support for the Freescale > M5474EVB? When I do a "make menuconfig" in the uClinux-Tree I can choose > the M5474EVB among the Freescale Products. But when I afterwards want to > configure the kernel then I can only see support for MCF5407 cpus which > are not working together with the M5474EVB. I am using a M5474EVB > together with a MCF5484 Coldfire processor. > Any hints are appreciated. > > Thanks and regards, > > Markus Franke > > > _______________________________________________ > uClinux-dev mailing list > [email protected] > http://mailman.uclinux.org/mailman/listinfo/uclinux-dev > This message was resent by [email protected] > To unsubscribe see: > http://mailman.uclinux.org/mailman/options/uclinux-dev _______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
