Jivin mlin17 lays it down ... > From now on , I know uclinux may not run script correctly?(disvantage of mash) > I have compiled the freeswan into my uclinux-system . when I start ipsec > manually as follows: > tncfg --attach --virtual ipsec0 --physical eth0 > ifconfig ipsec0 192.168.1.2 > pluto & > some imformation as follows: > an 1 01:33:11 Pluto[106]: Starting Pluto (FreeS/WAN Version ) > Jan 1 01:33:11 Pluto[106]: including X.509 patch (Version 0.9.13) > Jan 1 01:33:11 Pluto[106]: including NAT-Traversal patch (Version 0.3) > [disab > led] > Jan 1 01:33:11 Pluto[106]: ike_alg_register_enc: Activating OAKLEY_AES_CBC: > Ok > (ret=0) > Jan 1 01:33:11 Pluto[106]: Changing to directory '/etc/config' > > pluto stop here....who know why?
You probably need to run some "whack" commands to tell pluto about your tunnels, unless you want to use manually keyed tunnels. It's fairly simple to work out the whack commands you need it you install freeswan on a desktop system and then look at all the whack commands used to start a tunnel. Cheers, Davidm -- David McCullough, [EMAIL PROTECTED], Ph:+61 734352815 Secure Computing - SnapGear http://www.uCdot.org http://www.cyberguard.com _______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
