Jivin Markus Franke lays it down ... > Zitat von David McCullough <[EMAIL PROTECTED]>: > > > > >Back when I wrote this: > > > > http://www.ucdot.org/article.pl?sid=03/01/30/0548223 > > > >and the m68k-elf toolchain came with m68k-bdm-elf-gdb included, it was > >working to a resonable extent. > > I know this document very well. I tried the "m68k-bdm-elf-gdb" as well > as "m68k-elf-gdb" from m68k-elf-tools-20030314.sh. Both show the same > results as the m68k-uclinux-gdb from the latest Codesourcery Toolchain. > I tried debugging also with different *.gdb files respectively > different executables (created by the latest Codesourcery Toolchain) > without success. > > ---snip--- > (gdb) target remote board:3000 > Remote debugging using board:3000 > 0x03d40048 in ?? () > (gdb) b main > Cannot access memory at address 0x5a4 > ---snap--- > > The address 0x03d40048, which gets delivered by gdbserver, seems to be > correct but somehow gdb is not able to relocate the *.gdb file to the > correct address because it tries to access the target at address > 0x5a4. Any ideas, where the problem might come from? Codesourcery > toolchain, gdbserver????
Hmmm, beats me. Which kernel are you using ? Is there anything different about your app, have you tried a simple hello world program to see if that works ? Cheers, Davidm -- David McCullough, [EMAIL PROTECTED], Ph:+61 734352815 Secure Computing - SnapGear http://www.uCdot.org http://www.cyberguard.com _______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
