Hi All,
Under below link you can find the NXP LPC288x patch against linux-2.6.21
kernel, the vendor/NXP directory for uClinux.
While the document <Getting Started uClinux with LPC288x> can give you an
idea on how to start uClinux with NXP LPC288x MCU, including how to setup
the system, build and program images as well as how to connect USB and
MMC/SD card devices.
http://tech.groups.yahoo.com/group/lpc2400_uclinux/files
A snapshot of the console output:
U-Boot 1.1.6 (Jan 9 2008 - 01:56:04)
DRAM: 16 MB
Flash: 9 MB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
U-Boot> go 0x30008000
Linux version 2.6.21-uc1 ([EMAIL PROTECTED]) (gcc version
3.4.4) #690 Wed Jan 9 10:46:01 CST 2008
CPU: NXP-LPC2888 [00007700] revision 0 (ARMv3), cr=00000001
Machine: LPC28XX
Warning: bad configuration page, trying to continue
Built 1 zonelists. Total pages: 4064
Kernel command line: root=/dev/ram0 initrd=0x30900000,4096k keepinitrd
console=ttyS0,115200N8
PID hash table entries: 64 (order: 6, 256 bytes)
lpc28xx_time_init
Console: colour dummy device 80x30
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 16MB = 16MB total
Memory: 13628KB available (2256K code, 257K data, 88K init)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 512 bind 1024)
TCP reno registered
checking if image is initramfs...it isn't (bad gzip magic numbers);
looks like an initrd
NetWinder Floating Point Emulator V0.97 (double precision)
io scheduler noop registered (default)
lpc28xx lcd: driver loaded
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing
disabled
Serial8250: ttyS0 at MMIO 0x0 (irq = 12) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
register lpc28xx_udc
ether gadget: using random host ethernet address
usb0: Ethernet Gadget, version: May Day 2005
usb0: using lpc28xx_udc, OUT ep1out IN ep1in STATUS ep2in
usb0: MAC 12:34:56:78:99:aa
usb0: HOST MAC 26:5c:d7:66:2e:4d
usb0: RNDIS ready
lpc28xx rtc init
Open rtc...
lpc28xx_rtc lpc28xx_rtc: rtc core: registered lpc28xx_rtc as rtc0
LPC28XX Real Time Clock driver.
lpc28xx_mci: Multimedia Card Interface driver for NXP LPC22XX.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
lpc28xx_rtc_readtime(): 2969-08-03 17:22:55
lpc28xx_rtc lpc28xx_rtc: setting the system clock to 2969-08-03 17:22:55
(1479240303)
RAMDISK: romfs filesystem found at block 0
RAMDISK: Loading 751KiB [1 disk] into ram disk... <6>usb0: high speed
config #2: 100 mA, Ethernet Gadget, using RNDIS
done.
VFS: Mounted root (romfs filesystem) readonly.
Freeing init memory: 88K
mmcblk0: mmc0:d99b S016B 14560KiB
mmcblk0: unknown partition table
Welcome to
____ _ _
/ __| ||_|
_ _| | | | _ ____ _ _ _ _
| | | | | | || | _ \| | | |\ \/ /
| |_| | |__| || | | | | |_| |/ \
| ___\____|_||_|_| |_|\____|\_/\_/
| |
|_|
For further information check:
http://www.uclinux.org/
#
Best Regards,
Lucy Wang_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
