Hi Erwin,

Erwin Authried wrote:
Am Donnerstag, den 26.06.2008, 10:40 +1000 schrieb Greg Ungerer:
Hi Erwin,

Erwin Authried wrote:
serial_atmel.c is an ancient,crappy serial driver for AT91 cpus. Later,
a driver has been written for the AT91RM9200 that uses the rather new
serial core driver (atmel_serial.c). The serial hardware for the
mmu-less AT91 cpus and the AT91RM9200 is a bit different, thus the
atmel_serial driver can't be used for the mmu-less AT91 cpus. I have
adapted the new driver for AT91x40 cpus, with some improvements so that
no overrun errors can happen with high transfer speeds.
Can you get these changes mainlined?

I have managed to get core at91x40 cpu support mainlined
(within the arch/arm/mach-at91).

Hi Greg,
this is great. At the moment, I don't have the time to clean up the
patch for inclusion, and currently it is for 2.4 only. I can send you
the patch for 2.4 as-is, if you like, but it's possible that it needs
some tweaking. I have sent the patch to Bob, maybe we get back a 2.6
port if we are lucky.

Yep, please send me a copy of it too.
If Bob doesn't get to it first I'll have a look at up-porting
the changes to the 2.6 kernel version of the driver.

Thanks
Greg



Although there is still
a couple of missing non-mmu peices in the arm code - I
expect these will get mainlined sometime in the not too
distant future. I would be good to have the atmel_serial.c
driver support in there too.

Regards
Greg



Am Dienstag, den 24.06.2008, 09:11 -0700 schrieb rwarner:
Hi all

appears the htdig is intermittent. Does anyone know the the reason for the two serial drivers for Atmel. One is called serial_atmel.c the other is called atmel_serial.c

tia - bob



_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev


--
------------------------------------------------------------------------
Greg Ungerer  --  Chief Software Dude       EMAIL:     [EMAIL PROTECTED]
Secure Computing Corporation                PHONE:       +61 7 3435 2888
825 Stanley St,                             FAX:         +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev

Reply via email to