Hi David,
David Wu wrote:
I have attached a patch against uClinux-dist-test-20080627. This will
make you build the image on uC53281-EVM using "make
Arcturus/uC5329-xE32UVC240_default". But "thttp" will fail at loading
cgi program. Suggest to use the one in the Arcturus networks' ISO image
if you need it.
>
Note that this patch is not a final release.
Just a couple of comments:
@@ -503,7 +511,7 @@
config FREESCALE
bool
default y
- depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB ||
M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5329EVB || M5407C3)
+ depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB ||
M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5329EVB || UC5272 || UC5282 ||
UC532x|| M5407C3)
config HW_FEITH
bool
That looks wrong. The CONFIG_FREESCALE define is meant for
the family of eval boards manufactured by, or on behalf of,
Freescale.
@@ -134,6 +134,10 @@
*/
_start:
+#if defined(CONFIG_UCBOOTLOADER)
+ .long . /* sp */
+ .long . + 4 /* pc */
+#endif
nop /* filler */
movew #0x2700, %sr /* no interrupts */
No :-)
_start is the start of the code, it must be valid code.
Regards
Greg
On Fri, 27 Jun 2008 12:03:42 -0400, julian andres montes galvis
<[EMAIL PROTECTED]> wrote:
Hi Greg
I try with uC5329-xE32UVC240 and 532x boards in the configuration
but i have the same errorm referenced to `getbenv'
in attachment my config file
Julian
On Fri, 2008-06-27 at 10:51 -0500, julian andres montes galvis wrote:
Hi Julian,
julian andres montes galvis wrote:
> Host Debian
> Board arcturus uC53281EVM
> kernel selected 2.6
>
> I buyed and test a Board arcturus uC53281EVM, this kit has a cd
from
> arcturus with the uClinux-dist-ANI0806
> this distribution have a VoIP and Management Middleware, i don't
need
> this for my application, and I need
> free resources for my application.
>
> Then try to compile my image ( dist arcturus ) without the
middelware,
> but don't have any sucess. the image has the middelware of arcturus
> yet.
>
> After , i try to port the board to the oficial dist
> uClinux-dist-test-20080612
> and have this error.
>
>
> mm/slab.c: In function 'kfree':
> mm/slab.c:3792: warning: passing argument 2 of '__cache_free'
discards
> qualifiers from pointer target type
> drivers/char/mem.c: In function 'mmap_kmem':
> drivers/char/mem.c:303: warning: cast to pointer from integer of
> different size
> drivers/char/keyboard.c:1124:2: warning: #warning "Cannot generate
> rawmode keyboard for your architecture yet."
> fs/binfmt_flat.c: In function 'load_flat_file':
> fs/binfmt_flat.c:746: warning: unused variable 'persistent'
> fs/nfs/file.c:278: warning: 'nfs_file_mmap' defined but not used
> drivers/video/m532xfb.c:289: warning: 'm532xfb_setcolreg' defined
but
> not used
> WARNING: modpost: Found 2 section mismatch(es).
> To see full details build your kernel with:
> 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
> drivers/built-in.o: In function `scsi_dma_unmap':
> (.text+0x3c208): undefined reference to `dma_unmap_sg'
> drivers/built-in.o: In function `scsi_dma_map':
> (.text+0x3c234): undefined reference to `dma_map_sg'
> drivers/built-in.o: In function `parse_ucbootstrap_partitions':
> (.text+0x442e4): undefined reference to `getbenv'
> drivers/built-in.o: In function `parse_ucbootstrap_partitions':
> (.text+0x4436c): undefined reference to `getbenv'
> make[2]: *** [.tmp_vmlinux1] Error 1
> make[1]: *** [linux] Error 1
> make: *** [Arcturus/uC53281-EVM_default] Error 2
The getbenv refernece should be fixed in uClinux-dist-test-20080620.
And that can cleanly compile the uC5329-xE32UVC240 target.
If that is not exactly what you used cna you send you kernel
.config?
Regards
Greg
------------------------------------------------------------------------
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
--
------------------------------------------------------------------------
Greg Ungerer -- Chief Software Dude EMAIL: [EMAIL PROTECTED]
Secure Computing Corporation PHONE: +61 7 3435 2888
825 Stanley St, FAX: +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
