Regards, Swaroop ________________________________ From: Narasimha, Swaroop(IE10) Sent: Tuesday, September 23, 2008 1:27 PM To: '[email protected]' Cc: Hilot, Sankesh (IE10); Shivaram, Swaroop (IE10) Subject: USB Problem with MCF5372 Processor Hello We are having problem with the USB host interface with MCF5372L processor. We are using the MCF532X platform uClinux kernel (kernel message attached below). When we connect the USB Flash mass storage device, the processor detects this as a Full speed USB device, but when requests for the device descriptor ~sometimes this returns -110 as error code otherwise stops responding. Could you please help me on this...? Regards Swaroop This is the error message <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 <7>ehci ehci.1: GetStatus port 1 status ec001002 POWER sig=se0 CSC <7>hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s <7>ehci ehci.1: GetStatus port 1 status e4001403 POWER sig=k CSC CONNECT <7>hub 1-0:1.0: debounce: port 1: total 125ms stable 100ms status 0x301 usb 1-1: new low speed USB device using ehci and address 2 <6>usb 1-1: new low speed USB device using ehci and address 2 <7>ehci ehci.1: fatal command 010028 (park)=0 ithresh=1 Async period=256 HALT <7>ehci ehci.1: fatal status a088 Async Recl FLR <7>ehci ehci.1: fatal command 010028 (park)=0 ithresh=1 Async period=256 HALT <7>ehci ehci.1: fatal status 8088 Async FLR <7>usb 1-1: khubd timed out on ep0in len=0/64 Therse are the messages during boot Linux version 2.6.25-uc0 ([EMAIL PROTECTED]) (gcc version 4.1.1) #18 Wed Sep 17 17:09:15 IST 2008 uClinux/COLDFIRE(m532x) COLDFIRE port done by Greg Ungerer, [EMAIL PROTECTED] Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 Kernel command line: PID hash table entries: 128 (order: 7, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory available: 29504k/32768k RAM, (1556k kernel code, 196k data) Mount-cache hash table entries: 512 net_namespace: 152 bytes NET: Registered protocol family 16 USB-MCF532x: MCF532x USB Host device is registered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered io scheduler noop registered (default) ColdFire internal UART serial driver ttyS0 at MMIO 0xfc060000 (irq = 90) is a ColdFire UART console [ttyS0] enabled ttyS1 at MMIO 0xfc064000 (irq = 91) is a ColdFire UART ttyS2 at MMIO 0xfc068000 (irq = 92) is a ColdFire UART brd: module loaded loop: module loaded nbd: registered device at major 43 Driver 'sd' needs updating - please use bus_type methods uclinux[mtd]: RAM probe address=0x401d62f0 size=0x110000 Creating 1 MTD partitions on "RAM": 0x00000000-0x00110000 : "ROMfs" uclinux[mtd]: set ROMfs to be root filesystem MCF532x USB EHCI: is found. ID=0x5 Rev=0x41 ehci ehci.1: EHCI Host Controller ehci ehci.1: new USB bus registered, assigned bus number 1 ehci ehci.1: irq 176, io mem 0xfc0b4000 ehci ehci.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: uClinux 2.6.25-uc0 ehci_hcd usb usb1: SerialNumber: ehci.1 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. udc: Freescale MCF532x UDC driver version 27 October 2006 init gadgetfs: USB Gadget filesystem, version 24 Aug 2004 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Mounted root (romfs filesystem) readonly. Freeing unused kernel memory: 56k freed (0x401b9000 - 0x401c6000) Shell invoked to run file: /etc/rc Command: hostname uClinux Command: /bin/expand /etc/ramfs.img /dev/ram1 Command: mount -t proc proc /proc Command: mount -t ext2 /dev/ram1 /var Command: mkdir /var/tmp Command: mkdir /var/log Command: mkdir /var/run Command: mkdir /var/lock Command: mkdir /var/empty Command: ifconfig lo 127.0.0.1 Command: route add -net 127.0.0.0 netmask 255.0.0.0 lo Command: dhcpcd -p -a eth0 & [18] Command: cat /etc/motd Welcome to ____ _ _ / __| ||_| _ _| | | | _ ____ _ _ _ _ | | | | | | || | _ \| | | |\ \/ / | |_| | |__| || | | | | |_| |/ \ | ___\____|_||_|_| |_|\____|\_/\_/ | | |_| For further information check: http://www.uclinux.org/ Execution Finished, Exiting Nov 30 00:00:01 dhcpcd[18]: dhcpStart: ioctl SIOCGIFHWADDR: No such device Sash command shell (version 1.1.1) /> usb 1-1: new low speed USB device using ehci and address 2
_______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
