How To. http://mailman.uclinux.org/pipermail/uclinux-dev/2007-May/042875.html
Any Other Queries Look up at an similar posting. http://readlist.com/lists/uclinux.org/uclinux-dev/1/7489.html Thanks, Sujit On 1/16/09, Matthias Wieloch <[email protected]> wrote: > > > > Hello, > > > > I use uClinux on one of my controllers (lpc2468) and at the moment I try to > move from dist-20051411 to dist-20070130. So far I had not much problems but > somehow I can't enable the busybox's command history and tab completion. As > within dist-2005 in menuconfig I enabled to use another sheel and declared > busybox's msh as /bin/sh. > > But I also have an old problem. Within /etc/rc I run some init routines that > also set/expand environment variables. But after the startup is complete all > the environment variables are back to their default values. > > > > After the change I also have issues accessing the lpc's internal sram. In my > case I use it for some global data. But as soon as my program accesses the > pointer stored in the sram I get a SIGSEGV message on the console (and > resulting unhandled exception errors). > > I verified that this behaviour is OK by loading the older kernel and ran the > software without problems. > > > > I hope you can at least help me with some problems. > > > > Regards > > Matthias > _______________________________________________ > uClinux-dev mailing list > [email protected] > http://mailman.uclinux.org/mailman/listinfo/uclinux-dev > This message was resent by [email protected] > To unsubscribe see: > http://mailman.uclinux.org/mailman/options/uclinux-dev > _______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
