I am Ankit Bansal from India. Our group is working on porting uclinux to an ARM processor. I needed some help on the project .I saw that you have worked on a similar project. We were able to simulate uclinux on skyeye. Now we have got an ARM 9 board (samsung s3c2410 processor). It has embedded linux already ported along with it. We wanted to know how to port uclinux to the board. We tried to do make menuconfig and select the samsung s3c2410 as our target board in "system type" option under kernel settings but it gives an error during make operation. We have tried with both 2.4 and 2.6 kernel options. What should we do? Another doubt that i had was that we have developed an application of an httpd server with cgi.we planned to send a data to the server via seial port and display the value on the html page. We were able to successfully run the application on desktop linux. I wanted to know how to use httpd in install as it is not available in the embedded linux which is already loaded on the board?
_______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
