Thanks Christian, I don't have a /lib/modules/ directory. I must be missing an option somewhere.
This is the output of my build: [?????]$ make ARCH=arm CROSS_COMPILE=~/buildroot-v23434/build_arm/staging_dir/usr/bin/arm-linux- scripts/kconfig/conf -s arch/arm/Kconfig CHK include/linux/version.h make[1]: `include/asm-arm/mach-types.h' is up to date. CHK include/linux/utsrelease.h SYMLINK include/asm -> include/asm-arm CALL scripts/checksyscalls.sh <stdin>:1097:2: warning: #warning syscall fadvise64 not implemented <stdin>:1265:2: warning: #warning syscall migrate_pages not implemented <stdin>:1321:2: warning: #warning syscall pselect6 not implemented <stdin>:1325:2: warning: #warning syscall ppoll not implemented <stdin>:1365:2: warning: #warning syscall epoll_pwait not implemented CHK include/linux/compile.h CC arch/arm/kernel/compat.o CC arch/arm/kernel/setup.o LD arch/arm/kernel/built-in.o CC arch/arm/mm/init.o CC arch/arm/mm/mmu.o LD arch/arm/mm/built-in.o CC arch/arm/mach-at91/board-sam9g20ek.o LD arch/arm/mach-at91/built-in.o LD drivers/misc/built-in.o CC [M] drivers/misc/atmel_dave.o LD drivers/built-in.o CC sound/soc/atmel/sam9g20_wm8731.o LD sound/soc/atmel/snd-soc-atmel-pcm.o LD sound/soc/atmel/snd-soc-atmel_ssc_dai.o LD sound/soc/atmel/snd-soc-sam9g20-wm8731.o LD sound/soc/atmel/built-in.o LD sound/soc/built-in.o LD sound/built-in.o LD vmlinux.o MODPOST vmlinux.o GEN .version CHK include/linux/compile.h UPD include/linux/compile.h CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 KSYM .tmp_kallsyms1.S AS .tmp_kallsyms1.o LD .tmp_vmlinux2 KSYM .tmp_kallsyms2.S AS .tmp_kallsyms2.o LD vmlinux SYSMAP System.map SYSMAP .tmp_System.map OBJCOPY arch/arm/boot/Image Kernel: arch/arm/boot/Image is ready GZIP arch/arm/boot/compressed/piggy.gz AS arch/arm/boot/compressed/piggy.o LD arch/arm/boot/compressed/vmlinux OBJCOPY arch/arm/boot/zImage Kernel: arch/arm/boot/zImage is ready Building modules, stage 2. MODPOST 31 modules CC drivers/misc/atmel_dave.mod.o LD [M] drivers/misc/atmel_dave.ko Thanks, Dave. Hi Dave, if you build the loadable module with the make process for the image the loadable modules should be in /lib/modules/<version>/kernel/... Regards, Christian Hi, I have successfully built a simple driver module configured for built in operation and it runs at startup - great so far. I then built it for loadable operation and it builds ok. I am left with a .ko file. When I download my new image to the target, I cannot see the ko file in order to load it. Do I have to download the module separately or should it be part of the image and visible somewhere? Is there anything else I need to do other than enabling loadable module support and selecting the loadable module <M> in the config? I'm running 2.6.30 btw. Thanks, Dave W. _______________________________________________ uClinux-dev mailing list uClinux-dev@uclinux.org http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by uclinux-dev@uclinux.org To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev This electronic transmission is strictly confidential and intended solely for the addressee(s). If you are not the intended addressee, you must not disclose, copy or take any action in reliance of this email. If you have received this email in error please notify the sender as soon as possible. Any views expressed within this email may not necessarily be the views held by Calrec Audio Ltd. Calrec Audio Ltd have taken measures to ensure this email is free from computer viruses, however it is recommended that you also employ anti-virus measures on your computer systems. Calrec Audio Ltd. Registered in England. Registration number: 02392336. WEEE registration number: WEE/JE0051TQ/PRO. Registered address: Nutclough Mill, Hebden Bridge, West Yorks, HX7 8EZ. _______________________________________________ uClinux-dev mailing list uClinux-dev@uclinux.org http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by uclinux-dev@uclinux.org To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
