I have an old project based on the uclinux distribution from ~2006 that I am attempting to upgrade to the latest distribution 20110210.
I created some flash partitions in the uclinux.c file and checked all the boxes for flash and JFFS2 etc and now at boot time I get a string of the following errors when I mount a partition: JFFS2 warning: (23) check_node_data: MTD point failed: error code -22 The mounted partition (/mtd) seems to work just fine. I can copy files and remove them and they are retained through power cycles etc. I did not have these errors with the 2006 distribution (BTW this distribution has come a long way since then GOOD JOB!) Admittedly I have no knowledge of flash drivers etc so: Any suggestions of where the error comes from, what it means, what happens if I ignore it? Thank you for your time, Nunya
_______________________________________________ uClinux-dev mailing list uClinux-dev@uclinux.org http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by uclinux-dev@uclinux.org To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
