From: Greg Ungerer <g...@uclinux.org>
Make the ColdFire 5249 MBAR peripheral register definitions absolute
addresses, instead of offsets into the region.
The various ColdFire parts use different methods to address the internal
registers, some are absolute, some are relative to peripheral regions
which can be mapped at different address ranges (such as the MBAR and IPSBAR
registers). We don't want to deal with this in the code when we are
accessing these registers, so make all register definitions the absolute
address - factoring out whether it is an offset into a peripheral region.
This makes them all consistently defined, and reduces the occasional bugs
caused by inconsistent definition of the register addresses.
Signed-off-by: Greg Ungerer <g...@uclinux.org>
---
arch/m68k/include/asm/m5249sim.h | 34 +++++++++++++++---------------
arch/m68k/platform/coldfire/intc-5249.c | 10 ++++----
arch/m68k/platform/coldfire/m5249.c | 8 +++---
3 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 3d9c7d7..fdf45e6 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -134,23 +134,23 @@
#define MCFSIM2_GPIO1ENABLE (MCF_MBAR2 + 0x0B8) /* GPIO1
enabled */
#define MCFSIM2_GPIO1FUNC (MCF_MBAR2 + 0x0BC) /* GPIO1
function */
-#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt
status */
-#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear
*/
-#define MCFSIM2_GPIOINTENABLE 0xc4 /* GPIO interrupt
enable */
-
-#define MCFSIM2_INTLEVEL1 0x140 /* Interrupt level reg
1 */
-#define MCFSIM2_INTLEVEL2 0x144 /* Interrupt level reg
2 */
-#define MCFSIM2_INTLEVEL3 0x148 /* Interrupt level reg
3 */
-#define MCFSIM2_INTLEVEL4 0x14c /* Interrupt level reg
4 */
-#define MCFSIM2_INTLEVEL5 0x150 /* Interrupt level reg
5 */
-#define MCFSIM2_INTLEVEL6 0x154 /* Interrupt level reg
6 */
-#define MCFSIM2_INTLEVEL7 0x158 /* Interrupt level reg
7 */
-#define MCFSIM2_INTLEVEL8 0x15c /* Interrupt level reg
8 */
-
-#define MCFSIM2_DMAROUTE 0x188 /* DMA routing */
-
-#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */
-#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */
+#define MCFSIM2_GPIOINTSTAT (MCF_MBAR2 + 0xc0) /* GPIO intr
status */
+#define MCFSIM2_GPIOINTCLEAR (MCF_MBAR2 + 0xc0) /* GPIO intr
clear */
+#define MCFSIM2_GPIOINTENABLE (MCF_MBAR2 + 0xc4) /* GPIO intr
enable */
+
+#define MCFSIM2_INTLEVEL1 (MCF_MBAR2 + 0x140) /* Intr level
reg 1 */
+#define MCFSIM2_INTLEVEL2 (MCF_MBAR2 + 0x144) /* Intr level
reg 2 */
+#define MCFSIM2_INTLEVEL3 (MCF_MBAR2 + 0x148) /* Intr level
reg 3 */
+#define MCFSIM2_INTLEVEL4 (MCF_MBAR2 + 0x14c) /* Intr level
reg 4 */
+#define MCFSIM2_INTLEVEL5 (MCF_MBAR2 + 0x150) /* Intr level
reg 5 */
+#define MCFSIM2_INTLEVEL6 (MCF_MBAR2 + 0x154) /* Intr level
reg 6 */
+#define MCFSIM2_INTLEVEL7 (MCF_MBAR2 + 0x158) /* Intr level
reg 7 */
+#define MCFSIM2_INTLEVEL8 (MCF_MBAR2 + 0x15c) /* Intr level
reg 8 */
+
+#define MCFSIM2_DMAROUTE (MCF_MBAR2 + 0x188) /* DMA routing
*/
+
+#define MCFSIM2_IDECONFIG1 (MCF_MBAR2 + 0x18c) /* IDEconfig1 */
+#define MCFSIM2_IDECONFIG2 (MCF_MBAR2 + 0x190) /* IDEconfig2 */
/*
* Define the base interrupt for the second interrupt controller.
diff --git a/arch/m68k/platform/coldfire/intc-5249.c
b/arch/m68k/platform/coldfire/intc-5249.c
index f343bf7..0864b83 100644
--- a/arch/m68k/platform/coldfire/intc-5249.c
+++ b/arch/m68k/platform/coldfire/intc-5249.c
@@ -20,22 +20,22 @@
static void intc2_irq_gpio_mask(struct irq_data *d)
{
u32 imr;
- imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+ imr = readl(MCFSIM2_GPIOINTENABLE);
imr &= ~(0x1 << (d->irq - MCFINTC2_GPIOIRQ0));
- writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+ writel(imr, MCFSIM2_GPIOINTENABLE);
}
static void intc2_irq_gpio_unmask(struct irq_data *d)
{
u32 imr;
- imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+ imr = readl(MCFSIM2_GPIOINTENABLE);
imr |= (0x1 << (d->irq - MCFINTC2_GPIOIRQ0));
- writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+ writel(imr, MCFSIM2_GPIOINTENABLE);
}
static void intc2_irq_gpio_ack(struct irq_data *d)
{
- writel(0x1 << (d->irq - MCFINTC2_GPIOIRQ0), MCF_MBAR2 +
MCFSIM2_GPIOINTCLEAR);
+ writel(0x1 << (d->irq - MCFINTC2_GPIOIRQ0), MCFSIM2_GPIOINTCLEAR);
}
static struct irq_chip intc2_irq_gpio_chip = {
diff --git a/arch/m68k/platform/coldfire/m5249.c
b/arch/m68k/platform/coldfire/m5249.c
index df2968d..23b19cb 100644
--- a/arch/m68k/platform/coldfire/m5249.c
+++ b/arch/m68k/platform/coldfire/m5249.c
@@ -72,11 +72,11 @@ static void __init m5249_smc91x_init(void)
u32 gpio;
/* Set the GPIO line as interrupt source for smc91x device */
- gpio = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
- writel(gpio | 0x40, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+ gpio = readl(MCFSIM2_GPIOINTENABLE);
+ writel(gpio | 0x40, MCFSIM2_GPIOINTENABLE);
- gpio = readl(MCF_MBAR2 + MCFSIM2_INTLEVEL5);
- writel(gpio | 0x04000000, MCF_MBAR2 + MCFSIM2_INTLEVEL5);
+ gpio = readl(MCFSIM2_INTLEVEL5);
+ writel(gpio | 0x04000000, MCFSIM2_INTLEVEL5);
}
#endif /* CONFIG_M5249C3 */
--
1.7.0.4
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
