From: Sonic Zhang <sonic.zh...@analog.com>
Signed-off-by: Sonic Zhang <sonic.zh...@analog.com>
---
drivers/i2c/busses/i2c-bfin-twi.c | 12 ++++--------
1 files changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c
b/drivers/i2c/busses/i2c-bfin-twi.c
index d7e8fba..b2ca317 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -78,11 +78,6 @@ DEFINE_TWI_REG(XMT_DATA16, 0x84)
DEFINE_TWI_REG(RCV_DATA8, 0x88)
DEFINE_TWI_REG(RCV_DATA16, 0x8C)
-static const u16 pin_req[2][3] = {
- {P_TWI0_SCL, P_TWI0_SDA, 0},
- {P_TWI1_SCL, P_TWI1_SDA, 0},
-};
-
static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
unsigned short twi_int_status)
{
@@ -719,7 +714,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
p_adap->timeout = 5 * HZ;
p_adap->retries = 3;
- rc = peripheral_request_list(pin_req[pdev->id], "i2c-bfin-twi");
+ rc = peripheral_request_list((unsigned short *)pdev->dev.platform_data,
+ "i2c-bfin-twi");
if (rc) {
dev_err(&pdev->dev, "Can't setup pin mux!\n");
goto out_error_pin_mux;
@@ -766,7 +762,7 @@ out_error_add_adapter:
free_irq(iface->irq, iface);
out_error_req_irq:
out_error_no_irq:
- peripheral_free_list(pin_req[pdev->id]);
+ peripheral_free_list((unsigned short *)pdev->dev.platform_data);
out_error_pin_mux:
iounmap(iface->regs_base);
out_error_ioremap:
@@ -784,7 +780,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
i2c_del_adapter(&(iface->adap));
free_irq(iface->irq, iface);
- peripheral_free_list(pin_req[pdev->id]);
+ peripheral_free_list((unsigned short *)pdev->dev.platform_data);
iounmap(iface->regs_base);
kfree(iface);
--
1.7.0.4
_______________________________________________
Uclinux-dist-devel mailing list
Uclinux-dist-devel@blackfin.uclinux.org
https://blackfin.uclinux.org/mailman/listinfo/uclinux-dist-devel
