On Sat 25 May 2013 09:25:47 PM CST, Sonic Zhang wrote:
> Hi Jiang
>
> On Wed, May 8, 2013 at 11:51 PM, Jiang Liu <liu...@gmail.com> wrote:
>> Prepare for removing num_physpages and simplify mem_init().
>>
>> Signed-off-by: Jiang Liu <jiang....@huawei.com>
>> Cc: Mike Frysinger <vap...@gentoo.org>
>> Cc: Bob Liu <lliu...@gmail.com>
>> Cc: uclinux-dist-devel@blackfin.uclinux.org
>> Cc: linux-ker...@vger.kernel.org
>> ---
>> arch/blackfin/mm/init.c | 38 ++++++--------------------------------
>> 1 file changed, 6 insertions(+), 32 deletions(-)
>>
>> diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
>> index 1cc8607..e4b6e11 100644
>> --- a/arch/blackfin/mm/init.c
>> +++ b/arch/blackfin/mm/init.c
>> @@ -90,43 +90,17 @@ asmlinkage void __init init_pda(void)
>>
>> void __init mem_init(void)
>> {
>> - unsigned int codek = 0, datak = 0, initk = 0;
>> - unsigned int reservedpages = 0, freepages = 0;
>> - unsigned long tmp;
>> - unsigned long start_mem = memory_start;
>> - unsigned long end_mem = memory_end;
>> + char buf[64];
>>
>> - end_mem &= PAGE_MASK;
>> - high_memory = (void *)end_mem;
>> -
>> - start_mem = PAGE_ALIGN(start_mem);
>> - max_mapnr = num_physpages = MAP_NR(high_memory);
>> - printk(KERN_DEBUG "Kernel managed physical pages: %lu\n",
>> num_physpages);
>> + high_memory = (void *)(memory_end & PAGE_MASK);
>> + max_mapnr = MAP_NR(high_memory);
>> + printk(KERN_DEBUG "Kernel managed physical pages: %lu\n", max_mapnr);
>>
>> /* This will put all low memory onto the freelists. */
>> free_all_bootmem();
>>
>> - reservedpages = 0;
>> - for (tmp = ARCH_PFN_OFFSET; tmp < max_mapnr; tmp++)
>> - if (PageReserved(pfn_to_page(tmp)))
>> - reservedpages++;
>> - freepages = max_mapnr - ARCH_PFN_OFFSET - reservedpages;
>> -
>> - /* do not count in kernel image between _rambase and _ramstart */
>> - reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT;
>> -#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
>> - reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >>
>> PAGE_SHIFT;
>> -#endif
>> -
>> - codek = (_etext - _stext) >> 10;
>> - initk = (__init_end - __init_begin) >> 10;
>> - datak = ((_ramstart - _rambase) >> 10) - codek - initk;
>> -
>> - printk(KERN_INFO
>> - "Memory available: %luk/%luk RAM, "
>> - "(%uk init code, %uk kernel code, %uk data, %uk dma, %uk
>> reserved)\n",
>> - (unsigned long) freepages << (PAGE_SHIFT-10), (_ramend -
>> CONFIG_PHY_RAM_BASE_ADDRESS) >> 10,
>> - initk, codek, datak, DMA_UNCACHED_REGION >> 10,
>> (reservedpages << (PAGE_SHIFT-10)));
>
> You can't remove all these memory information for blackfin. They are
> useful on blackfin platform.
>
> Regards,
>
> Sonic
Hi Sonic,
Thanks for review!
We are not trying to remove these code, but replacing it
with a generic
helper function mem_init_print_info(), which will print similar (actual
more info)
boot message. I have no blackfin platforms to generate a real boot
message,
so could only share an example boot messages on x86:
Memory: 7744624K/8074824K available (6969K kernel code, 1011K data,
2828K rodata, 1016K init, 9640K bss, 330200K reserved)
Regards!
Gerry
_______________________________________________
Uclinux-dist-devel mailing list
Uclinux-dist-devel@blackfin.uclinux.org
https://blackfin.uclinux.org/mailman/listinfo/uclinux-dist-devel
