Hi, as promised I've tested all the available isdn dsp firmwares, here are the results:
Used software: Kernel 2.6.16.28-xen Kernel driver ueagle-atm.c revision 302 from svn br2684ctl -c 0 -a 1.32 pppd 2.4.3 with pppoe plugin 3.3 Used hardware: Devolo MicroLink ADSL Fun USB (vid 0X1039, pid 0X2111, Rev 0X4000) Recognized as Annex A/pots, forced isdn by overwriting the firmware image files Tested firmwares from http://eagle-usb.org/ueagle-atm/non-free/3.0.4b_dsp_cmv.tar.gz (built with bnm2dsp) $ md5sum `find . -name "*.dsp"` | sort 82b02f87820d7de691859100b26ea18c ./bnm_czeck/rtbldei.dsp 922f382b1bc18c054e431b3433d484e0 ./bnm_germany/rtbldei.dsp ad117f4549c62d885d1d04e3a643f105 ./bnm_switzerland/rtbldei.dsp c3b436866d35fc76963870cd7be15b98 ./bnm_spain/rtbldei.dsp ccbd5c998716c737bc07119802f0d60e ./bnm_hansenet/rtbldei.dsp e3ff46c98b87d11e87ad8eca83f60b02 ./bnm_netherlands/rtbldei.dsp Same as ./bnm_germany/rtbldei.dsp, not tested: 922f382b1bc18c054e431b3433d484e0 ./bnm_italy/rtbldei.dsp 922f382b1bc18c054e431b3433d484e0 ./IDMA_Files/rtbldei.dsp Same as ./bnm_spain/rtbldei.dsp, not tested: c3b436866d35fc76963870cd7be15b98 ./bnm_sweden/rtbldei.dsp All firmwares, except ./bnm_hansenet/rtbldei.dsp worked fine and loaded as follows: -- ohci_hcd 0000:00:02.1: wakeup usb 2-3: new full speed USB device using ohci_hcd and address 7 usb 2-3: configuration #1 chosen from 1 choice [ueagle-atm] driver ueagle-svn $Id$ loaded usb 2-3: [ueagle-atm] ADSL device founded vid (0X1039) pid (0X2111) Rev (0X4000): Eagle I usb 2-3: reset full speed USB device using ohci_hcd and address 7 usb 2-3: [ueagle-atm] pre-firmware device, uploading firmware usb 2-3: [ueagle-atm] loading firmware ueagle-atm/eagleI.fw usbcore: registered new driver ueagle-atm usb 2-3: [ueagle-atm] firmware uploaded usb 2-3: USB disconnect, address 7 ohci_hcd 0000:00:02.1: wakeup usb 2-3: new full speed USB device using ohci_hcd and address 8 usb 2-3: configuration #1 chosen from 1 choice usb 2-3: [ueagle-atm] ADSL device founded vid (0X1039) pid (0X2110) Rev (0X4002): Eagle I usb 2-3: reset full speed USB device using ohci_hcd and address 8 usb 2-3: [ueagle-atm] using iso mode usb 2-3: [ueagle-atm] created proc entry at: /proc/driver/ueagle-atm/002-008 usb 2-3: [ueagle-atm] (re)booting started usb 2-3: [ueagle-atm] ATU-R firmware version : xxxxxxxx usb 2-3: [ueagle-atm] Modem started, waiting synchronization usb 2-3: [ueagle-atm] modem operational -- ./bnm_hansenet/rtbldei.dsp seems to use an incompatible protocol and didn't work at all: -- ohci_hcd 0000:00:02.1: wakeup usb 2-3: new full speed USB device using ohci_hcd and address 18 usb 2-3: configuration #1 chosen from 1 choice usb 2-3: [ueagle-atm] ADSL device founded vid (0X1039) pid (0X2110) Rev (0X4002): Eagle I usb 2-3: reset full speed USB device using ohci_hcd and address 18 usb 2-3: [ueagle-atm] using iso mode usb 2-3: [ueagle-atm] created proc entry at: /proc/driver/ueagle-atm/002-018 usb 2-3: [ueagle-atm] (re)booting started usb 2-3: [ueagle-atm] ATU-R firmware version : 40e4be17 usb 2-3: [UEAGLE-ATM] unexpected cmv received,Function : 3, Subfunction : 1 usb 2-3: [UEAGLE-ATM] writing cmv failed with error -110 usb 2-3: [ueagle-atm] (re)booting started usb 2-3: [ueagle-atm] ATU-R firmware version : 40e4be17 usb 2-3: [UEAGLE-ATM] unexpected cmv received,Function : 3, Subfunction : 1 usb 2-3: [UEAGLE-ATM] writing cmv failed with error -110 usb 2-3: [ueagle-atm] (re)booting started usb 2-3: [ueagle-atm] ATU-R firmware version : 40e4be17 usb 2-3: [UEAGLE-ATM] unexpected cmv received,Function : 3, Subfunction : 1 ... -- "stats" output after downloading a 5 MB file via ftp 5 times and uploading it once: ./bnm_czeck/rtbldei.dsp: ueagle-atm status display ------------------------------------------------------------- Vendor ID : 0x1039 Product ID : 0x2110 Rev: 0x4002(pots) USB Bus : 002 USB Device : 008 Dbg : 0 VID-CPE 28 Firmware version 40e4bea9 Tx Rate 320 Kps Rx Rate 2336 Kps Tx Atten 8 dB Rx Atten 10 dB Tx Margin 29 dB Rx Margin 38 dB Tx Blocks 1532559 Rx Blocks 1532490 Tx FEC 0 Rx FEC 0 Tx Error 0 Rx Error 0 Delin GOOD Flags 0000000000 Modem is operational -- ./bnm_germany/rtbldei.dsp: ueagle-atm status display ------------------------------------------------------------- Vendor ID : 0x1039 Product ID : 0x2110 Rev: 0x4002(pots) USB Bus : 002 USB Device : 010 Dbg : 0 VID-CPE 28 Firmware version 41e4ea09 Tx Rate 320 Kps Rx Rate 2336 Kps Tx Atten 8 dB Rx Atten 10 dB Tx Margin 29 dB Rx Margin 38 dB Tx Blocks 1709268 Rx Blocks 1709268 Tx FEC 0 Rx FEC 0 Tx Error 0 Rx Error 0 Delin GOOD Flags 0000000000 Modem is operational -- ./bnm_switzerland/rtbldei.dsp: ueagle-atm status display ------------------------------------------------------------- Vendor ID : 0x1039 Product ID : 0x2110 Rev: 0x4002(pots) USB Bus : 002 USB Device : 012 Dbg : 0 VID-CPE 28 Firmware version 40e4be95 Tx Rate 320 Kps Rx Rate 2336 Kps Tx Atten 8 dB Rx Atten 10 dB Tx Margin 29 dB Rx Margin 38 dB Tx Blocks 1587000 Rx Blocks 1587000 Tx FEC 0 Rx FEC 0 Tx Error 0 Rx Error 0 Delin GOOD Flags 0000000000 Modem is operational -- ./bnm_spain/rtbldei.dsp: ueagle-atm status display ------------------------------------------------------------- Vendor ID : 0x1039 Product ID : 0x2110 Rev: 0x4002(pots) USB Bus : 002 USB Device : 014 Dbg : 0 VID-CPE 28 Firmware version 40e4be96 Tx Rate 320 Kps Rx Rate 2336 Kps Tx Atten 8 dB Rx Atten 10 dB Tx Margin 29 dB Rx Margin 38 dB Tx Blocks 1468389 Rx Blocks 1468320 Tx FEC 0 Rx FEC 0 Tx Error 0 Rx Error 0 Delin GOOD Flags 0000000000 Modem is operational -- ./bnm_netherlands/rtbldei.dsp: ueagle-atm status display ------------------------------------------------------------- Vendor ID : 0x1039 Product ID : 0x2110 Rev: 0x4002(pots) USB Bus : 002 USB Device : 020 Dbg : 0 VID-CPE 28 Firmware version 41e4ea0b Tx Rate 320 Kps Rx Rate 2336 Kps Tx Atten 8 dB Rx Atten 10 dB Tx Margin 29 dB Rx Margin 37 dB Tx Blocks 2671680 Rx Blocks 2671542 Tx FEC 0 Rx FEC 0 Tx Error 0 Rx Error 0 Delin GOOD Flags 0000000000 Modem is operational -- The throughput was the same with all working firmwares: 5242880 bytes received in 21.1 secs (2.4e+02 Kbytes/sec) 5242880 bytes sent in 153 secs (33 Kbytes/sec) hth. Cheers, Johann _______________________________________________ Ueagleatm-dev mailing list Ueagleatm-dev@gna.org https://mail.gna.org/listinfo/ueagleatm-dev
