On Monday 06 August 2007 23:51, Cilyan Olowen wrote:
> Hello everyone,
>
> I'm currently testing the ueagle-atm4 (or ueagle4-atm) there :
> http://download.gna.org/ueagleatm/ueagle-atm-svn-20070330.tar.gz
> and I had some problems when plugging the modem.
>
> The module loads correctly and upload the firmware but then says it is
> "(re)booting" but as I could see some times, it repeats the operation
> infinitely and either it hangs up the system or it "disable" the keyboard
> (all other controls are OK, but I'm unable to have more information about
> what is going wrong).
This is probably problem with udev/hotplug firmware loader. With current
ueagle-atm svn version system should working normally in such case.
Please test newest revision from svn, there are tools to download from svn
repository under windows or you could download code using gna web
interface to subversion.
> I'm using Archlinux and the 2.6.22.1 kernel and the
> modem I'm trying to get working is a Sagem Fast800 E4 given by Orange
> (Ex-Wanadoo / France Telecom). Modem works fine under windows.
> Any help ?
Probably you need install some package for Archlinux like hotplug,
udev or firmware.agent. To check for udev: "grep firmware /etc/udev/rules.d/*"
/etc/udev/rules.d/z55_hotplug.rules: SUBSYSTEM=="firmware",
RUN+="firmware.agent"
--
Cheers
Stanislaw Gruszka
_______________________________________________
Ueagleatm-dev mailing list
Ueagleatm-dev@gna.org
https://mail.gna.org/listinfo/ueagleatm-dev
