Hi Javi
well, I had them synchronized - here you see it: pcdog at opensolaris:~# pfexec prtvtoc /dev/rdsk/c7t0d0s2| fmthard -s - / dev/rdsk/c7t1d0s2 fmthard: New volume table of contents now in place. pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0s2 cannot attach c7t1d0s2 to c7t0d0s0: new device must be a single disk pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0s0 cannot attach c7t1d0s0 to c7t0d0s0: new device must be a single disk pcdog at opensolaris:~# was that wrong? ---- Silvan Gebhardt, pcdog at pcdog.ch +41 32 512 69 58 VOIP CH +41 52 720 39 88 Analog CH +41 78 810 39 88 Cell CH +1 (505) 480-9905 Cell US +1 (360) 718-3416 Landline US + 1 866-941-3869 Toll Free US +31 85 888 0256 NL +44 1225 63 7104 UK Am 25.09.2009 um 11:58 schrieb Javi: > Your partition tables are not identicals! > > On Fri, Sep 25, 2009 at 11:54 AM, Silvan M. Gebhardt > <pcdog at pcdog.ch> wrote: >> hi folks >> >> >> I can't mirror my drive on my new PVM opensolaris guest :( >> >> >> I tried this and it still messes with me: >> >> >> pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0s0 >> cannot attach c7t1d0s0 to c7t0d0s0: new device must be a single disk >> pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0 >> cannot label 'c7t1d0': EFI labeled devices are not supported on >> root pools. >> pcdog at opensolaris:~# format -e >> Searching for disks...done >> >> >> AVAILABLE DISK SELECTIONS: >> 0. c7t0d0 <DEFAULT cyl 1957 alt 0 hd 255 sec 63> >> /xpvd/xdf at 51712 >> 1. c7t1d0 <DEFAULT cyl 1957 alt 0 hd 255 sec 63> >> /xpvd/xdf at 51728 >> Specify disk (enter its number): 1 >> selecting c7t1d0 >> [disk formatted, no defect list found] >> >> >> FORMAT MENU: >> disk - select a disk >> type - select (define) a disk type >> partition - select (define) a partition table >> current - describe the current disk >> format - format and analyze the disk >> fdisk - run the fdisk program >> repair - repair a defective sector >> show - translate a disk address >> label - write label to the disk >> analyze - surface analysis >> defect - defect list management >> backup - search for backup labels >> verify - read and display labels >> save - save new disk/partition definitions >> volname - set 8-character volume name >> !<cmd> - execute <cmd>, then return >> quit >> format> label >> [0] SMI Label >> [1] EFI Label >> Specify Label type[0]: 0 >> Ready to label disk, continue? yes >> >> format> show >> Enter a disk block: ^C >> format> quit >> pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0 >> cannot label 'c7t1d0': EFI labeled devices are not supported on >> root pools. >> pcdog at opensolaris:~# zpool attach -f rpool c7t0d0s0 c7t1d0s0 >> cannot attach c7t1d0s0 to c7t0d0s0: new device must be a single disk >> pcdog at opensolaris:~# >> >> >> >> >> ---- >> >> Silvan Gebhardt, >> pcdog at pcdog.ch >> >> >> +41 32 512 69 58 VOIP CH >> +41 52 720 39 88 Analog CH >> +41 78 810 39 88 Cell CH >> +1 (505) 480-9905 Cell US >> +1 (360) 718-3416 Landline US >> + 1 866-941-3869 Toll Free US >> +31 85 888 0256 NL >> +44 1225 63 7104 UK >> >> >> >> >> _______________________________________________ >> ug-chosug mailing list >> ug-chosug at opensolaris.org >> http://mail.opensolaris.org/mailman/listinfo/ug-chosug >>
