There are various firmware issues with early V6 on RB2011’s. If you update them past 6.11 (or it might be 6.14) the issue “goes away”.
We use them gig port auto neg into FTTC modems without issue in this fashion Peter Knapp T: 0113 294 66 99 F: 0113 273 00 58 E: [email protected]<mailto:[email protected]> W: www.ccsleeds.co.uk<http://www.ccsleeds.co.uk/> Registered in England, # 350 7910 From: uknof [mailto:[email protected]] On Behalf Of Stuart Howlette Sent: 27 August 2014 10:55 To: Richard Halfpenny Cc: [email protected] Subject: Re: [uknof] Openreach Modem Issue I wish I could say thats the worst thing I've seen a MikroTik do but I'd be lying through my teeth On 27 August 2014 10:52, Richard Halfpenny <[email protected]<mailto:[email protected]>> wrote: On 27/08/2014 10:36, Stuart Howlette wrote: > /interface ethernet set auto-negotation=no speed=<SPEED> duplex=<DUPLEX> > > Unless I'm missing something, that works fine Nope, the modem wants to autoneg.. force 100M/FULL and the link doesn't come up at all. Leave it to autoneg and the most you get is 10M/FULL. Rich. Network Operations Exa Networks Ltd :: AS30740 [email protected]<mailto:[email protected]> -- Stuart Howlette [email protected]<mailto:[email protected]>
