Hi Paul,
It just works. I’ve used it many times. There may be two issues: I got some issues with 19.07.2, but I was not able to have time to debug it. I’ve not tested it with 19.07.3. 19.07.1 worked fine all the time. You don’t need to configure anything, just install the module and create the interface. You CAN’T disable the firewall, or it will not work. This may be the trick. If you have any specific issue, I may be able to help. There are several vendors offering CLAT already, but I can’t disclose the details because I’m involved in projects with them under NDA. I’m right now involved in a deployment project of around 25.000.000 subscribers (DSL, GPON and cellular). All is working fine up to now, but slowed down because the traveling restrictions/Covid-19. Some of them can be located by googling … Regards, Jordi @jordipalet El 30/6/20 12:00, "uknof en nombre de Paul Bone" <[email protected] en nombre de [email protected]> escribió: Hi All, Has anyone got 464XLAT (CLAT) working on OpenWRT? I can't seem to find any useful documentation. Or is anyone aware of another low-cost CPE option supporting 464XLAT (CLAT)? Thanks -- Paul Bone Network Consultant PMB Technology ********************************************** IPv4 is over Are you ready for the new Internet ? http://www.theipv6company.com The IPv6 Company This electronic message contains information which may be privileged or confidential. The information is intended to be for the exclusive use of the individual(s) named above and further non-explicilty authorized disclosure, copying, distribution or use of the contents of this information, even if partially, including attached files, is strictly prohibited and will be considered a criminal offense. If you are not the intended recipient be aware that any disclosure, copying, distribution or use of the contents of this information, even if partially, including attached files, is strictly prohibited, will be considered a criminal offense, so you must reply to the original sender to inform about this communication and delete it.
