Bertrand, You can quite successfully use ms-dos, I have done so because I found the free dos format program a little slow - and the dos format will only work if you are running the dos OS
Regards Kevin Lawry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 24 September 2003 14:28 To: [EMAIL PROTECTED] Subject: [Unattended] format problem I'm in early stages of testing unattended on a laptob with an e100b network interface. (I use the e100b image) I've partionned the disk to have a 2Gb C:, but format fails with Call to int 0x21, 0x440d 0x60, failed error 0f. Do I need to use this specific format command (a GNU one) or may I replace it by the 6.20 MS version? more generally, may I rebuild the boot diskette using a different Dos version? ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ unattended-info mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/unattended-info ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ unattended-info mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/unattended-info
