denis bonnenfant <[EMAIL PROTECTED]> writes: > Hi, > tomorrow I tested the 4.1b linux boot disk, with dhcp option 233 (it > works, great!) and i had a strange message : when mapping z, > It displays something like "lame ...." (I'm at home and don't > remember exactly the message),
Probably "creating lame upcase table" and "creating lame lowcase table". I did not bother nailing /usr/lib/upcase.dat and lowcase.dat onto the CD because I had this fantasy about saving space. It was a silly idea. Fixed in next release. > and then wait more than 3 or4 minutes before continuing (smbstatus > shows no connexions on the server). Then connexion is established > and everything is ok. My server is a samba 2.2.8 box, on XFS > partition with ACLS. The strange thing is that i never had this > problem before, with 4.0 and I didn't change anything on the server. That is strange, since this has not changed between releases. What HAS changed is how we mount the share. We switched from a read-only mount to a read/write mount. I am considering reverting this change and adding a boot-time option to allow a read/write mount. The install share really ought to be read-only... I will see if I can find time to make this change and roll a new test release tomorrow. - Pat ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ unattended-info mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/unattended-info
