Heya, > NE2000 ist not plug and play and not a PCI-Card. Therefore you have to > specify the module and the parameters. In one of my machines > I have a line > in /etc/modules.conf: > > >> alias eth1 ne > >> add options ne io=0x300 > > equivalent would be something like "/sbin/modprobe ne io=0x300". And you > have to be sure that the card is configured with this IO-Adress. The > programm for changing the card-configuration is usually MS-DOS based.
Ah! I was trying the ne2k-pci module! So the problem I now have is there is no ne.ko module on the linux CD. How would I rebuild the linux image to include that? Cheers! Mark. -- This e-mail message may contain confidential or privileged information. Recipients are requested to preserve this confidentiality and to advise the sender immediately of any error in transmission. Any views/opinions expressed in this email are that of the author and may not reflect the views of Salamis Group - www.salamisgroup.com ------------------------------------------------------- This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM. Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php _______________________________________________ unattended-info mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/unattended-info
