This is how I did it. Steve V http://support.microsoft.com/default.aspx?scid=kb;EN-US;254078 you don�t need the OemPnPDriversPath if the hardware is automatically recognized by W2K PnP Setup. If your HW like NIC,VGA are not working with W2K native drivers you have to add 2 entrie in your unattended.txt [UNATTENDED] DriverSigningPolicy = Ignore OemPnPDriversPath = \Drivers\NIC\E100B;\Drivers\Video\Matrox youcan add more pathes if you like separated by ";" BUT the \drivers directory has to be placed beneath: \\Server\Share\\W2K\Netsetup\$OEM$\$1\ At setup time the files/foleders located inside the \drivers directory will be copied to your 1.partition usually "c:" so you will get C:\Drivers\NIC\E100B and so on ... During PnP Setup W2K searches inside it�s own drivers.cab for right one, if they where not found there, it will have a look inside c:\drivers .....
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anders Nystr�m Sent: Friday, September 17, 2004 3:39 AM To: [EMAIL PROTECTED] Subject: [Unattended] new network card needed help! I got some new HP dc7100s computers and they have a new NIC - again. The NIC is Broadcom NetXtreme Gigabit Can I do anything or... tia Anders Nystr�m ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ unattended-info mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/unattended-info
