have a problem to make 4.5 works on a dell poweredge 4300.
logs/dmesg/lspci at the end
seems to be a problem with i2o
Loading i2o_block...
FATAL: Error inserting i2o_block
(/lib/modules/2.6.9/kernel/drivers/message/i2o/i2o_block.ko): Unknown
symbol in module, or unknown parameter (see dmesg)
...done loading i2o_block
Loading i2o_proc...
FATAL: Error inserting i2o_proc
(/lib/modules/2.6.9/kernel/drivers/message/i2o/i2o_proc.ko): Unknown
symbol in module, or unknown parameter (see dmesg)
...done loading i2o_proc
Regards
Julien
=== . /etc/master
[...]
*** Excellent. Now, let's see about mass storage controllers...
Looking for PCI devices of class 0x010000 (mask 0xFF0000)
00:07.1 Class 0101: 8086:7111 (rev 01)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
02:04.0 Class 0100: 9005:001f (rev 01)
02:04.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891 (rev 01)
02:06.0 Class 0100: 9004:6078 (rev 03)
02:06.0 SCSI storage controller: Adaptec AIC-7860 (rev 03)
Looking for PCI devices of class 0x0E0000 (mask 0xFFFF00)
02:0a.1 Class 0e00: 8086:1960 (rev 03)
02:0a.1 I2O: Intel Corp. 80960RP [i960RP Microprocessor] (rev 03)
Looking for PCI devices of class 0x050800 (mask 0xFFFF00)
(module piix already loaded)
Loading ide-generic...
...done loading ide-generic
Loading ide-disk...
...done loading ide-disk
(module aic7xxx already loaded)
(module aic79xx already loaded)
(module aic7xxx already loaded)
(module i2o_core already loaded)
Loading i2o_block...
FATAL: Error inserting i2o_block
(/lib/modules/2.6.9/kernel/drivers/message/i2o/i2o_block.ko): Unknown
symbol in module, or unknown parameter (see dmesg)
...done loading i2o_block
Loading i2o_proc...
FATAL: Error inserting i2o_proc
(/lib/modules/2.6.9/kernel/drivers/message/i2o/i2o_proc.ko): Unknown
symbol in module, or unknown parameter (see dmesg)
...done loading i2o_proc
(module sd_mod already loaded)
(module sd_mod already loaded)
*** Now we will load the EDD module...
(module edd already loaded)
*** ...and locate the boot device
Unable to determine boot device at /usr/bin/find-boot-device line 207.
*** find-boot-device failed
*** Dropping to shell
=== dmesg
.
Calibrating delay loop... 688.12 BogoMIPS (lpj=344064)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=0
checking if image is initramfs... it is
Freeing initrd memory: 7567k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfcc0e, last bus=3
PCI: Using configuration type 1
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [8086/7110] at 0000:00:07.0
PCI->APIC IRQ transform: (B0,I8,P0) -> 20
PCI->APIC IRQ transform: (B0,I10,P0) -> 21
PCI->APIC IRQ transform: (B2,I4,P0) -> 16
PCI->APIC IRQ transform: (B2,I6,P0) -> 16
PCI->APIC IRQ transform: (B2,I10,P0) -> 18
PCI: Cannot allocate resource region 4 of device 0000:00:07.1
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Databook TCIC-2 PCMCIA probe: not found.
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 120k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Enabling device 0000:00:07.2 (0000 -> 0001)
PCI: No IRQ known for interrupt pin C of device 0000:00:07.2. Probably
buggy MP table.
uhci_hcd 0000:00:07.2: Found HC with no IRQ. Check BIOS/PCI
0000:00:07.2 setup!
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
e100: eth0: e100_probe: addr 0xfe104000, irq 20, MAC addr 00:90:27:CC:79:92
e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PCI: Enabling device 0000:00:07.1 (0000 -> 0001)
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
PIIX4: neither IDE port enabled (BIOS)
Probing IDE interface ide0...
ide0: Wait for ready failed before probe !
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
SCSI subsystem initialized
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec aic7890/91 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
Using anticipatory io scheduler
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec aic7860 Ultra SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
(scsi1:A:5): 20.000MB/s transfers (20.000MHz, offset 15)
Vendor: NEC Model: CD-ROM DRIVE:465 Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
(scsi1:A:6): 10.000MB/s transfers (10.000MHz, offset 15)
Vendor: SONY Model: SDT-9000 Rev: 0400
Type: Sequential-Access ANSI SCSI revision: 02
I2O Core - (C) Copyright 1999 Red Hat Software
i2o: max_drivers=4
Unable to handle kernel paging request at virtual address d09debd8
printing eip:
c0198ba9
*pde = 0fc1d067
*pte = 00000000
Oops: 0002 [#1]
Modules linked in: i2o_core aic7xxx scsi_mod ide_disk ide_generic piix
ide_core nls_iso8859_1 cifs e100 mii usbhid uhci_hcd usbcore
CPU: 0
EIP: 0060:[<c0198ba9>] Not tainted VLI
EFLAGS: 00010296 (2.6.9)
EIP is at kobject_add+0x69/0xd0
eax: c0297ca0 ebx: d086c45c ecx: d09debd8 edx: d086c478
esi: c0297ca8 edi: 00000000 ebp: d086c444 esp: cfacdf3c
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 775, threadinfo=cfacc000 task=cfceeaa0)
Stack: d086c45c ffffffea 00000000 c0198c2b d086c45c d086c45c d086c45c
c0297c40
c01dbc1b d086c45c d086c420 00000000 d086c4b8 cfacc000 c01dc10d
d086c444
c028fe40 d086c4e0 d08641b2 d086416d c019f58e d086c444 00000000
d086c580
Call Trace:
[<c0198c2b>] kobject_register+0x1b/0x40
[<c01dbc1b>] bus_add_driver+0x3b/0x90
[<c01dc10d>] driver_register+0x2d/0x40
[<d08641b2>] i2o_driver_register+0x112/0x140 [i2o_core]
[<d086416d>] i2o_driver_register+0xcd/0x140 [i2o_core]
[<c019f58e>] pci_register_driver+0x4e/0x70
[<d080012a>] i2o_pci_init+0xa/0x10 [i2o_core]
[<d0800032>] i2o_iop_init+0x32/0x60 [i2o_core]
[<c0128782>] sys_init_module+0x122/0x190
[<c01057e7>] syscall_call+0x7/0xb
Code: 01 00 ff ff 8d 41 48 0f c1 10 85 d2 0f 85 ea 04 00 00 85 f6 74 6b
8b 43 28 8d 53 1c 83 c0 08 89 43 1c 8b 48 04 89 50 04 89 4a 04 <89> 11
8b 43 28 8b 38 8d 4f 48 89 c8 ba ff ff 00 00 0f c1 10 0f
<4>i2o_block: Unknown symbol i2o_msg_get_wait
i2o_block: Unknown symbol i2o_msg_nop
i2o_block: Unknown symbol i2o_event_register
i2o_block: Unknown symbol i2o_msg_post_wait_mem
i2o_block: Unknown symbol i2o_device_claim
i2o_block: Unknown symbol i2o_parm_field_get
i2o_block: Unknown symbol i2o_driver_register
i2o_block: Unknown symbol i2o_driver_unregister
i2o_block: Unknown symbol i2o_device_claim_release
i2o_proc: Unknown symbol i2o_parm_table_get
i2o_proc: Unknown symbol i2o_controllers
i2o_proc: Unknown symbol i2o_parm_field_get
i2o_proc: Unknown symbol i2o_status_get
i2o_proc: Unknown symbol i2o_driver_register
i2o_proc: Unknown symbol i2o_driver_unregister
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
inserting floppy driver for 2.6.9
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
==== lspci -vn
00:00.0 Class 0600: 8086:71a0
Subsystem: 1028:007c
Flags: bus master, medium devsel, latency 32
Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
00:01.0 Class 0604: 8086:71a1
Flags: bus master, 66Mhz, medium devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-0000ffff
Memory behind bridge: fb000000-fdffffff
Prefetchable memory behind bridge: f7000000-f7ffffff
00:02.0 Class 0604: 1011:0024 (rev 03)
Flags: bus master, medium devsel, latency 32
Bus: primary=00, secondary=02, subordinate=03, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f9000000-faffffff
Prefetchable memory behind bridge: 00000000f5000000-00000000f6f00000
Capabilities: [dc] Power Management version 1
00:07.0 Class 0601: 8086:7110 (rev 02)
Flags: bus master, medium devsel, latency 0
00:07.1 Class 0101: 8086:7111 (rev 01) (prog-if 80 [Master])
Flags: medium devsel
I/O ports at 1000 [size=16]
00:07.2 Class 0c03: 8086:7112 (rev 01)
Flags: medium devsel
I/O ports at 1020 [size=32]
00:07.3 Class 0680: 8086:7113 (rev 02)
Flags: medium devsel, IRQ 9
00:08.0 Class 0200: 8086:1229 (rev 08)
Subsystem: 8086:100c
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at fe104000 (32-bit, non-prefetchable) [size=4K]
I/O ports at dcc0 [size=64]
Memory at fe000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 2
00:0a.0 Class 0280: 1267:1018
Flags: bus master, fast devsel, latency 32, IRQ 21
I/O ports at dc80 [size=64]
Memory at fe100000 (32-bit, non-prefetchable) [size=16K]
I/O ports at dc78 [size=4]
01:00.0 Class 0300: 1002:4744 (rev 5c)
Subsystem: 1028:007c
Flags: bus master, VGA palette snoop, stepping, medium devsel, latency
32
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at fc00 [size=256]
Memory at fbfff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
02:04.0 Class 0100: 9005:001f (rev 01)
Subsystem: 1028:007c
Flags: bus master, medium devsel, latency 32, IRQ 16
BIST result: 00
I/O ports at ec00 [disabled] [size=256]
Memory at f9fff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fa000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
02:06.0 Class 0100: 9004:6078 (rev 03)
Subsystem: 9004:7860
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at e800 [disabled] [size=256]
Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 1
02:0a.0 Class 0604: 8086:0960 (rev 03)
Flags: bus master, medium devsel, latency 32
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
02:0a.1 Class 0e00: 8086:1960 (rev 03) (prog-if 01)
Subsystem: 1028:1111
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at f6c00000 (32-bit, prefetchable) [size=4M]
Expansion ROM at fa000000 [disabled] [size=32K]
-------------------------------------------------------
This SF.Net email is sponsored by: InterSystems CACHE
FREE OODBMS DOWNLOAD - A multidimensional database that combines
robust object and relational technologies, making it a perfect match
for Java, C++,COM, XML, ODBC and JDBC. www.intersystems.com/match8
_______________________________________________
unattended-info mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/unattended-info
