Hi Tobias,
sorry for the late reply.
I don't think that you should change something in the data section. you
have to use the fdisk_cmds in the _meta section.
This is what I do to get 2 partitions using the Linux bootdisk; 1
Partition of 10G for the system and all other space for the second
partition.
See my unattended.txt and the explanations as an example:
----------------snip----------------------------------------------------
--
[_meta]
fdisk_lba=1
fdisk_cmds="fdisk /clear 1;fdisk /pri:10000 ;fdisk /pri:100,100
/spec:7;fdisk /delete /pri:1;fdisk /pri:2000;fdisk /activate:1"
; ; delete 1st Part, make new Part
with 10000MB, rest of Harddisk for 2nd Partition
; ; then delete 1st again, new
part 2000 Mbyte (dos cant handle big partitions but win will auto resize
it later)
; ; activate first part
fdisk_confirm=0
; ;don't confirm for the commands
format_cmd="format /y /z:seriously /q /u /a /v: c:"
; ; format C with fat32
replace_mbr=1
top=base.bat
; middle=""
; bottom=""
edit_files=0
[Unattended]
UnattendMode=DefaultHide
FileSystem=ConvertNTFS
ExtendOemPartition=1
OemSkipEula=Yes
OemPreinstall=Yes
UnattendSwitch=Yes
; Do not prompt if a driver has not been Signed.
DriverSigningPolicy = Ignore
OemPnPDriversPath =
"Treiber\audio\9x_W2k_XP;Treiber\display\intel865;Treiber\chipset\ICH5_8
65;Treiber\network\intel100;Treiber\network\intelgig"
[Data]
AutoPartition=1
MsDosInitiated="0"
UnattendedInstall=Yes
------------------------------snap--------------------------------------
--------------
Hope this helps,
Tobias
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday, October 04, 2005 9:13 AM
To: [email protected]
Subject: [Unattended] Can`t create two Partitions ?
Hello,
once again the question: Why can`t I create two partitions with the cvs
version from unattended.
I use vims new linuxboot CD. Before that I used the dosbootdisk with the
same unattended.txt and it worked great.
Here is a bit of unattended.txt:
[_meta]
fdisk_lba=1
replace_mbr=1
fdisk_confirm=0
format_cmd="format /y /z:seriously /q /u /a /v: c:"
fdisk_cmds="fdisk /clear 1;fdisk /pri:8192;fdisk /pri:100,100
/spec:7;fdisk /activate:1"
top=base.bat
middle="formatd.bat;profil-adm.bat;vse710egs.bat;notes.bat;mozilla.bat;s
un-jre.bat;adobe-reader.bat;mrs.bat;sap.bat;nsm.bat;flash.bat;office2keg
s.bat;dna.bat;reflect.bat;%%WINVER%%-symbols.bat;cacls.bat;joindomain.ba
t;domainuser.bat"
local_admins=""
ntp_servers="10.114.10.106"
edit_files=1
[Data]
AutoPartition=0
MsDosInitiated=0
UnattendedInstall=Yes
It doesn`t mather what I choose at the Data section. It is the same
problem everytime. I only creates one big partition.
I don`t know what to do ? Have anyone a idea what I have to change,
othertimes I have to go back to the dosboot disk...
Thank you very much.
Regards,
Tobias Richter
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads,
discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
unattended-info mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/unattended-info
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
unattended-info mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/unattended-info
