Steve,

So, you know doubt know "import" is not in Icon so that's why icont does not 
work for this program.

As for why unicon would not be finding guih.icn to include, guih.icn lives 
where, unicon/uni/gui. Normally

this is found magically by looking in some directories relative to where your 
iconx is on the path. If you've done some interesting things with installation 
locations, you might have to set your LPATH to include whatever location(s) you 
want to $include from, the old fashioned way.


If you haven't completed the adding Unicon to your path, and instead used an 
alias or something, that might explain not finding include directories relative 
to where iconx is found...


Cheers,

Clint

________________________________
From: Steve Graham <jsgraha...@yahoo.com>
Sent: Saturday, September 17, 2016 6:05:03 PM
To: Unicon Group
Subject: Re: [Unicon-group] Unable to build from Alpha 13.0

Clint,

Thanks, those instructions did the trick.

A few years ago with your help and those of others here in this group, I 
created my first real Windows GUI program.  I did such on a Windows 7 computer 
and tried recompiling that program today on my Ubuntu 16.04 system.  It fails 
to compile and I can't figure out why.

import gui
$include "guih.icn"
#
# To do
# 1.  On saving home teachers and families, only save those which are not 
assigned to routes
#

global dataStore, filef, fileht, filer, fromRoute, itemToBeMoved, 
procedureStore, routes

class Untitled : Dialog(panel_1, border_1, save_button, cancel_button, 
Route_1_Checkbox, Route_1_List, Route_1_label, Route_1_Families, 
Route_2_Checkbox, Route_2_List, Route_2_label, Route_2_Families, 
Route_3_Checkbox, Route_3_List, Route_3_label, Route_3_Families, 
Route_4_Checkbox, Route_4_List, Route_4_label, Route_4_Families, 
Route_5_Checkbox, Route_5_List, Route_5_label, Route_5_Families, 
Route_6_Checkbox, Route_6_List, Route_6_label, Route_6_Families, 
Route_7_Checkbox, Route_7_List, Route_7_label, Route_7_Families, 
Route_8_Checkbox, Route_8_List, Route_8_label, Route_8_Families, 
Route_9_Checkbox, Route_9_List, Route_9_label, Route_9_Families, 
Route_10_Checkbox, Route_10_List, Route_10_label, Route_10_Families, 
Route_11_Checkbox, Route_11_List, Route_11_label, Route_11_Families, 
Route_12_Checkbox, Route_12_List, Route_12_label, Route_12_Families, 
Route_13_Checkbox, Route_13_List, Route_13_label, Route_13_Families, 
Route_14_Checkbox, Route_14_List, Route_14_label, Route_14_Families, 
Route_15_Checkbox, Route_15_List, Route_15_label, Route_15_Families, 
Route_16_Checkbox, Route_16_List, Route_16_label, Route_16_Families, 
Route_17_Checkbox, Route_17_List, Route_17_label, Route_17_Families, 
Route_18_Checkbox, Route_18_List, Route_18_label, Route_18_Families, 
Route_19_Checkbox, Route_19_List, Route_19_label, Route_19_Families, 
Route_20_Checkbox, Route_20_List, Route_20_label, Route_20_Families, 
Route_21_Checkbox, Route_21_List, Route_21_label, Route_21_Families, 
Route_22_Checkbox, Route_22_List, Route_22_label, Route_22_Families, 
Route_23_Checkbox, Route_23_List, Route_23_label, Route_23_Families, 
Route_24_Checkbox, Route_24_List, Route_24_label, Route_24_Families, 
Route_25_Checkbox, Route_25_List, Route_25_label, Route_25_Families, 
Route_26_Checkbox, Route_26_List, Route_26_label, Route_26_Families, 
Route_27_Checkbox, Route_27_List, Route_27_label, Route_27_Families, 
Route_28_Checkbox, Route_28_List, Route_28_label, Route_28_Families, 
Route_29_Checkbox, Route_29_List, Route_29_label, Route_29_Families, 
Route_30_Checkbox, Route_30_List, Route_30_label, Route_30_Families, 
Route_31_Checkbox, Route_31_List, Route_31_label, Route_31_Families, 
Route_32_Checkbox, Route_32_List, Route_32_label, Route_32_Families, 
Route_33_Checkbox, Route_33_List, Route_33_label, Route_33_Families, 
Route_34_Checkbox, Route_34_List, Route_34_label, Route_34_Families, 
Route_35_Checkbox, Route_35_List, Route_35_label, Route_35_Families, 
Route_36_Checkbox, Route_36_List, Route_36_label, Route_36_Families)

...

---

steve@steve-Satellite-L555D:~/Desktop/HT$ icont ht.icn
Translating:
ht.icn:
ht.icn:1: # "import": invalid declaration
ht.icn:8: # ";": invalid declaration
  main
  copyFile
  getSelection
  handleAllHomeTeachers
  handleFamily
  handleHomeTeacher
  labelToList
  LoadTable
  makeRouteLabel
  makeSelectionList
  printReport
  putSelection
  removeDistrict
  repaintSelectionList
  SaveData
  saveTable
  sortedList
  toInternalIndex
2 errors

---

steve@steve-Satellite-L555D:~/Desktop/HT$ unicon ht.icn
File ht.icn; Line 2 # $include: cannot open "guih.icn"

steve@steve-Satellite-L555D:~/Desktop/HT$


________________________________
From: "Jeffery, Clint (jeffe...@uidaho.edu)" <jeffe...@uidaho.edu>
To: Unicon Group <unicon-group@lists.sourceforge.net>; Steve Graham 
<jsgraha...@yahoo.com>
Sent: Thursday, September 15, 2016 5:41 PM
Subject: Re: [Unicon-group] Unable to build from Alpha 13.0

Hi Steve,

It sounds like you've got your path problem sorted out for an existing session 
by manually setting it, but you still want a path solution that will work 
automatically for each shell session in future.  You know, UNIX is a wonderful 
thing, and one of the
wonderful parts is that it has so many shells with different initialization 
files.  For example, you set your path in .profile, but
you don't mention what your shell is.  Maybe you needed to set it in .bashrc 
instead of .profile.  Or maybe you needed to set
it in .cshrc, with different syntax.  And you probably already know that after 
adding Unicon to your path in one of these files,
you have to either reboot, or re-login, or at least run the "source" command, 
in order for your change to take effect.

If I am walking into a generic UNIX and don't know what shell I am running, I 
run "ps" and it typically lists what shell process is executing. That tells me 
then, which initialization file and which syntax I have to use to modify my 
path.  For example, on my current Linux, I am running bash.  ~/.profile did 
work to add unicon to its PATH, but I did have to "source ~/.profile" or else 
re-login in order for the change to take effect.

Cheers,
Clint
________________________________
From: Steve Graham <jsgraha...@yahoo.com>
Sent: Thursday, September 15, 2016 4:49:22 PM
To: Unicon Group
Subject: Re: [Unicon-group] Unable to build from Alpha 13.0

I downloaded the file from http://unicon.org/dist/uni.zip

steve@steve-Satellite-L555D:/opt/unicon/bin$ ./unicon -features
Unicon Version 13.0 alpha.  Oct 1, 2015
UNIX
POSIX
DBM
ASCII
co-expressions
dynamic loading
environment variables
event monitoring
external functions
keyboard functions
large integers
multiple programs
pattern type
pipes
pseudo terminals
system function
messaging
graphics
X Windows
libz file compression
JPEG images
PNG images
CCompiler gcc 5.4.0
Physical memory: 3878723584 bytes
Revision
Arch x86_64
CPU cores 2
Binaries at /opt/unicon/bin/
steve@steve-Satellite-L555D:/opt/unicon/bin$

I tried adding /opt/unicon/bin to /etc/profile and ~/.profile, but the PATH was 
unchanged when starting up a new terminal.

When adding them to the PATH of an existing terminal, I am able to start ui and 
within ui am able to compile and run the program (only if it ends in .icn 
though).


Thanks, Steve

________________________________
From: Jafar Al-Gharaibeh <to.ja...@gmail.com>
To: Steve Graham <jsgraha...@yahoo.com>
Cc: "Jeffery, Clint (jeffe...@uidaho.edu)" <jeffe...@uidaho.edu>; Unicon Group 
<unicon-group@lists.sourceforge.net>
Sent: Thursday, September 15, 2016 3:04 PM
Subject: Re: [Unicon-group] Unable to build from Alpha 13.0

Hello Steve,

    Are you building off svn checkout? or downloading the zipped sources from 
unicon.org<http://unicon.org/>?
     "unicon -features" tells you which revision you have exactly. That might 
be useful when reporting a problem.
    I tested ui and didn't and it worked with a hello world program. However 
the lines "Script started... Script done" lines seems to be something that 
shouldn't be there, I don't remember seeing them before.

Do you have "/opt/unicon/bin/" in your path?

--Jafar



On Thu, Sep 15, 2016 at 1:31 PM Steve Graham 
<jsgraha...@yahoo.com<mailto:jsgraha...@yahoo.com>> wrote:
Another question on setup.

I downloaded and compiled Unicon again on the same system.  After remembering 
to make the change to Makedefs, it worked fine.  I placed the unicon directory 
in /opt.

I'm having trouble compiling from ui:

steve@steve-Satellite-L555D:/opt/unicon/bin$ ./ui <-- Brings up ui

Typing in the Hello Amigo program I select Run/Run, which results in a terminal 
window coming up which says:

Script started, file is /tmp/ui17730737.tmp
bash: ./Hello-Amigo: No such file or directory
Script done, file is /tmp/ui17730737.tmp

steve@steve-Satellite-L555D:/tmp$ cat ui17730737.tmp
Script started on Thu 15 Sep 2016 11:22:37 AM PDT
bash: ./Hello-Amigo: No such file or directory

Script done on Thu 15 Sep 2016 11:22:37 AM PDT
steve@steve-Satellite-L555D:/tmp$

What am I doing wrong here?


Thanks, Steve

________________________________
From: Jafar Al-Gharaibeh <to.ja...@gmail.com<mailto:to.ja...@gmail.com>>
To: Steve Graham <jsgraha...@yahoo.com<mailto:jsgraha...@yahoo.com>>
Cc: "Jeffery, Clint (jeffe...@uidaho.edu<mailto:jeffe...@uidaho.edu>)" 
<jeffe...@uidaho.edu<mailto:jeffe...@uidaho.edu>>; Unicon Group 
<unicon-group@lists.sourceforge.net<mailto:unicon-group@lists.sourceforge.net>>
Sent: Monday, August 15, 2016 12:31 PM

Subject: Re: [Unicon-group] Unable to build from Alpha 13.0

Steve,

Thanks for the update. Not sure why you had the problem the first time. Maybe 
something went wrong during initialization/configuration. I also have see 
anonymous svn checkout/update to be unreliable/out-of-date in some rare 
occasions. I'm glad we got it sorted out anyway.

Cheers,
Jafar
On Mon, Aug 15, 2016 at 11:59 AM, Steve Graham 
<jsgraha...@yahoo.com<mailto:jsgraha...@yahoo.com>> wrote:
Clint:  Thanks for the suggestions.

Jafar:
Your suggestions proved to be the solution.  Here is a compare between the 
original Makedefs and the generated one

steve@steve-Satellite-L555D:/ opt/unicon$ diff Makedefs.old Makedefs
25c25
< RLIBS = $(LIBS) -L../../bin -lm -lgdbm -ltp -lnsl -ldl -lcrypt
---
> RLIBS = -ltp $(LIBS) -L../../bin -lm -lgdbm -lnsl -ldl -lcrypt
steve@steve-Satellite-L555D:/ opt/unicon$

Not sure why the original one gave me problems because I got everything last 
week from the svn site.


Thanks, Steve

________________________________
From: Jafar Al-Gharaibeh <to.ja...@gmail.com<mailto:to.ja...@gmail.com>>
To: "Jeffery, Clint (jeffe...@uidaho.edu<mailto:jeffe...@uidaho.edu>)" 
<jeffe...@uidaho.edu<mailto:jeffe...@uidaho.edu>>
Cc: Steve Graham <jsgraha...@yahoo.com<mailto:jsgraha...@yahoo.com>>
Sent: Thursday, August 11, 2016 8:16 AM

Subject: Re: [Unicon-group] Unable to build from Alpha 13.0

Steve,

Just to make sure we get this properly fixed, I looked at my Makedef to see the 
order of the libraries. I have these lines:

AC_LIBS= -lcrypto -lssl -lpthread -lGLU -lGL -lpng -ljpeg -lX11 -lz -lcrypt 
-lnsl

LIBS = -L/usr/lib64 $(AC_JV_LDFLAGS) $(AC_GL_LDFLAGS) $(AC_LIBS) -lm

RLIBS = -ltp $(LIBS) -L../../bin -lm -lgdbm -lnsl -ldl -lcrypt

RLIBS is what eventually used at the link line, and as you can see we 
specifically placed -ltp before LIBS. I remember doing this a while back, not 
sure if the change was triggered by ssl or another library. This change has 
been in svn for a long time. The template for x86_64_linux Makedef file is 
under unicon/config/x86_64_linux/ Makedfes.

Is there a chance your Makedefs template is out of date? I suggest you do "svn 
up" at the top level Unicon directory and see if you get new stuff.

Cheers,
Jafar


On Thu, Aug 11, 2016 at 12:26 AM Jafar Al-Gharaibeh 
<to.ja...@gmail.com<mailto:to.ja...@gmail.com>> wrote:

For some reason my gmail's spam filter got all  Steve's emails, I got confused 
when I got the email from Clint! :) sorry I didn't help earlier.

 From glancing through your logs and without trying on my end, I suspect the 
problem is in the order of libraries at the link line. Specially -lss should 
probably come after -ltp, and maybe the same goes for -lcrypto. After you 
configure, please edit your Unicon/Makedefs file to make the change, and 
proceed to build as usual.


Sorry Again!
Jafar


On Wed, Aug 10, 2016 at 7:50 PM, Jeffery, Clint 
(jeffe...@uidaho.edu<mailto:jeffe...@uidaho.edu>) 
<jeffe...@uidaho.edu<mailto:jeffe...@uidaho.edu>> wrote:
Steve,

Thanks, the extra details are necessary for us to figure out why your Unicon 
isn't building OK.  To be honest, debugging at this level of detail is probably 
not that entertaining and we should take it off of unicon-group. However, if we 
learn something of general interest, we can post back about it.

Your next step is to tell me exactly what libssl you got, from where or using 
what command, so I can try to apply the same packages to my Ubuntu machine. 
Your best hope for a quick resolution is for either myself or Jafar to be able 
to reproduce your trouble.

I also will want to know the value of your LD_LIBRARY_PATH environment variable 
if any, and the output of "nm" for whatever version of libssl you are linking 
in with the -lssl command. When autoconf finds a viable libssl and tells the 
make command to link it in, the same link that causes the test to pass would 
normally cause the symbols that are undefined to be included in your iconx, so 
it is a puzzler.

Cheers,
Clint

________________________________
From: Steve Graham <jsgraha...@yahoo.com<mailto:jsgraha...@yahoo.com>>
Sent: Wednesday, August 10, 2016 2:10 PM
To: Jeffery, Clint (jeffe...@uidaho.edu<mailto:jeffe...@uidaho.edu>); Unicon 
Group
Subject: Re: [Unicon-group] Unable to build from Alpha 13.0

Here is the log from my attempt at building Unicon:


------------------------------ ------------------------------ ------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity
planning reports. http://sdm.link/zohodev2dev
______________________________ _________________
Unicon-group mailing list
Unicon-group@lists. sourceforge.net<mailto:Unicon-group@lists.sourceforge.net>
https://lists.sourceforge.net/ 
lists/listinfo/unicon-group<https://lists.sourceforge.net/lists/listinfo/unicon-group>


--
-- Sent From My Smartphone


--
-- Sent From My Smartphone




------------------------------------------------------------------------------
_______________________________________________
Unicon-group mailing list
Unicon-group@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/unicon-group

Reply via email to