Thanks guys.  I appreciate the info.  I only have 40 feet of chain and
don't have a dinghy on the stern.  All the water drains to the stern
except for the water on the bridge and water on the deck at the front
of the bow.  All the pictures I have seen out there look as though the
boats sit low in the bow similar to ours.

On Feb 4, 11:05 am, [email protected] wrote:
> Jason--in reference to chain in the anchor locker, I have limited myself to 
> only 50 feet of chain and then all rode to minimize the weight in the bow.  
> Water on the back deck flows aft with the dinghy up or down.  My dinghy is a 
> hard shell 9 foot Sorenson with a 15 hp  Merc that is carried on davits off 
> the back of the swim platform and is on its side when totally out of the 
> water.  Probably 180-200 lbs all told. This does affect the attitude of the 
> boat some.  But I still have to trim some to get on plane (which does not 
> happen much any more with fuel priced as it is.   Hal
>
>
>
> ----- Original Message -----
> From: "CNO Bill" <[email protected]>
> To: "UnifliteWorld" <[email protected]>
> Sent: Monday, February 2, 2009 8:15:40 PM GMT -08:00 US/Canada Pacific
> Subject: [UnifliteWorld] Re: 34' SS Water on the flybridge
>
> jason,
>
> you might look at how much chain anchor rode you have in the locker.
> That can add a lot of weight at the bow. The dingy should not effect
> the trim on the boat. Uni's are designed to drain all water aft and to
> the scuppers. Also I'm sure you have noticed that a dink forward
> disables the use of the forward hatch.
> 38' uni sport fisher
>
> On Jan 16, 7:30 pm, Jason <[email protected]> wrote:
> > My 34’ SS seems to sit an inch or two low in the bow.  This then
> > causes water to pool up on the fly-bridge.  Has anyone else
> > experienced this?  Is it likely caused by an unknown modification or
> > do I just need to always have my fuel tanks full and a dingy on the
> > stern?- Hide quoted text -
>
> - Show quoted text -

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"UnifliteWorld" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/UnifliteWorld?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to