Hi, Check your ground wires. The first part of your paragraph sounded like a poor ground. Capt. Perry
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of gile Sent: Wednesday, May 27, 2009 7:42 PM To: UnifliteWorld Subject: [UnifliteWorld] windlass problem on 32 SS Hi I recently noticed that my windlass is not working the way it suppose on my Uniflite 32 SS. I believe assembly is original. basically the anchor was going up and down really slow and it looked like there was no power in the pull at all (was going like a foot in ten seconds). I did some quick research and I find out that solenoids get dirty over the years and loose strength (or something like that...I am not so good with electrical part at all). So I've made a exact note of wire positions. Ordered two new solenoids (believe 12 V continuous). Put everything together....yeap ....nothing.... not the buzz not a sound not the move..... Original solenoids had markings RBM controls 12 V on the bottom one had also FD the other was AC. They have these numbers on the side 70111224-5, also one with FD mark on the bottom has 1564 number on the top of it. Appreciate any kind of suggestions Goran No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.12.43/2138 - Release Date: 05/27/09 18:21:00 --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/UnifliteWorld?hl=en -~----------~----~----~----~------~----~------~--~---
