If the prop was re sized sometime, the prop shop is supposed to X out the old dia and pitch and stamp in the new size. Some times that does not happen. Look close to make sure there are not two sets of size numbers.
Capt Perry _____ From: [email protected] [mailto:[email protected]] On Behalf Of e b Sent: Wednesday, October 14, 2009 10:14 PM To: UnifliteWorld Subject: [UnifliteWorld] Re: Broken Crank Chrysler 360 it should be stamped on the hub, either between the blades or on the face opposite the nut. yes, the first number is the diameter and the second the pitch. eric > Date: Wed, 14 Oct 2009 14:44:50 -0700 > Subject: [UnifliteWorld] Re: Broken Crank Chrysler 360 > From: [email protected] > To: [email protected] > > > How do I tell what prop I have? I believe it is a 16x12. > > 16 is the size, and 12 is the inches per turn, right? > </html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.421 / Virus Database: 270.14.16/2435 - Release Date: 10/14/09 06:33:00 --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en -~----------~----~----~----~------~----~------~--~---
