I had posted previously about the sliding rear doos on here but to recap the rollers are on a offset shaft that aluminum star shaped end is designed to turn to lower and raise the doors. I took my doors apart to get them out but realized if you drill the shaft in the middle out the door will drop down and can then be removed. Swisco makes the replacement rollers for the door. My door stops were removed so afterward I put hooks in to keep the doors from moving when a wake goes by they will slide that easy,,also the small set screw that locks the height adjuster in place is perfect foe maintenance, just remove screw stick the red straw from can of silicone and squirt,then put back screw. My head has engine blower behind a vent cover behind the toilet for venting head yes a bit noisy but effective just leave door open a bit so fresh air gets in....good luck and enjoy.
-- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/unifliteworld/06c7418d-7dcb-46d0-bd61-51bddc7f3b83o%40googlegroups.com.
