Hi Kevin, Well, I was able to access the generator, also a 7.5 Onan. My unit is mounted on a steel plate which sits atop a plywood shelf on the port side right against the engine room/galley bulkhead. The plate is attached by three hefty wood screws to the base. After removing the screws/clamp pc., I was able to use a regular framing size flatbar to get under the plate and lift it enough to start getting a few 3/4" black pipe couplings underneath. It moved quite easily once the rollers were positioned in the right direction. I managed to caddie-corner it enough to get behind it. Next time I have to access it I will have some better pipe pcs but this seems to be the way to move it. The unit hour meter has very few hours on it so it is probably worth it to renovate it. I removed the exh. manifold and installed a new riser. Next,will put in a Vetus muffler. It does not appear that there was ever a muffler so the Vetus should quiet it down. The engine runs like a top and it is putting out juice. Steve M.
-- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/unifliteworld/201eb735-a6a3-4d42-862e-7529cc8036aeo%40googlegroups.com.
