killick wrote:
Kevin P. at Slim Devices support gave me instructions to make sure that
the SB2 MAC address matched the address on the bottom of the unit. But
what should match to what?
SB2 setup MAC address does match the ethernet MAC address on the bottom
of the unit, but...
Then you are done.
My SB2 is plugged into a Wireless Ethernet Bridge with a different pair
of MAC addresses, one for LAN and one for WLAN-- they match neither the
SB2 nor my router.
That is normal. Every ethernet connection/nic has its own
MAC address.
My router says the MAC address at 192.168.2.4 is yet again a different
number from all the others.
No, your router is saying that the IP address is 192.168....
Four dotted numbers, ranging from 0 to 255.
MAC addresses are nearly always HEX
For my SqueezeBoxes, the values look like
00:04:20:05:13:aa;
00:04:20:05:75:E4;
00:04:20:05:13:AB;
So it is likely that the first bytes were assigned to SlimDevices
or one of their OEMs.
You've got another problem.
--
Pat
http://www.pfarrell.com/music/slimserver/slimsoftware.html
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/unix
