Type dmesg, and look for an entry like this after your plug in the hard
disk:
Code:
--------------------
usb 1-1: new high speed USB device using ehci_hcd and address 7
usb 1-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
scsi 1:0:0:0: Direct-Access WD 3200JB External 0108 PQ: 0 ANSI: 0
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
sdb: sdb1
sd 1:0:0:0: Attached scsi disk sdb
usb-storage: device scan complete
--------------------
>From the above, my hard disk is /dev/sdb, and sdb1 is the partition
with all of my data.
Once you have that information, you need to mount that partition. First
create a mountpoint - eg, /mnt/music:
Code:
--------------------
mkdir /mnt/music
--------------------
Then mount the drive there:
Code:
--------------------
mount /dev/sdb1 /mnt/music
--------------------
If this works, you can look into mount-time options and so on.
Good luck!
--
bukharin
------------------------------------------------------------------------
bukharin's Profile: http://forums.slimdevices.com/member.php?userid=10859
View this thread: http://forums.slimdevices.com/showthread.php?t=36820
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/unix
