Another approach to this in Fedora:
If you want to have your server's eth0 configured to a static ip
address, then it's preferable to get rid of the 'NetworkManager' service
and use 'network' instead:
# chkconfig NetworkManager off
# chkconfig network on
Then look at your /etc/sysconfig/networking/devices/ifcfg-eth0 file.
Mine looks like this:
Code:
--------------------
# Intel Corporation 82541GI Gigabit Ethernet Controller
DEVICE=eth0
BOOTPROTO=none
BROADCAST=192.168.0.255
DNS1=208.67.222.222
DNS2=208.67.220.220
DNS3=192.168.0.1
GATEWAY=192.168.0.1
HWADDR=aa:bb:cc:dd:ee:ff
IPADDR=192.168.0.198
NETMASK=255.255.255.0
ONBOOT=yes
TYPE=Ethernet
USERCTL=yes
IPV6INIT=no
NM_CONTROLLED=no
PEERDNS=yes
ETHTOOL_OPTS="wol g"
--------------------
That last entry (ETHTOOL_OPTS="wol g") seems to do the trick in terms
of seeing to it that WOL is always enabled. If you need to build a
ifcfg-eth0 file from scratch, you can get your nic's HWADDR from either
# ifconfig or from # cat /etc/udev/rules.d/70-persistent-net.rules.
--
gharris999
------------------------------------------------------------------------
gharris999's Profile: http://forums.slimdevices.com/member.php?userid=115
View this thread: http://forums.slimdevices.com/showthread.php?t=68188
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
