...that the Mytek USB2 firmware is in fact on the R6 image? I know the MyTek USB1 firmware is there. Here's what I'm seeing:
[fedora@wandboard ~]$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 25ce:010e [fedora@wandboard ~]$ lsmod|grep snd_usb_mytek snd_usb_mytek 15294 0 Note: THE ABOVE LINE IS IN RED FONT? [fedora@wandboard ~]$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sgtl5000audio [sgtl5000-audio], device 0: HiFi sgtl5000-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: imxspdif [imx-spdif], device 0: IMX SPDIF mxc-spdif-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: imxhdmisoc [imx-hdmi-soc], device 0: IMX HDMI TX mxc-hdmi-soc-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 3: DAC [STEREO192-DSD DAC], device 0: USB Audio [USB Audio] Subdevices: 0/1 Subdevice #0: subdevice #0 [fedora@wandboard ~]$ exit logout The above test is the same on both my Dual Wand R6 and my Quad Wand R6 No MyTek USB2. TIA John Marshall SqueezeCenter 7.3.4 running on a DIY PC, Windows 7 64 bit o.s., with Inguz Audio EQ/DRC. (1) Transporter, (4) Booms & (2) CSOS SqueezeliteWands connected through a Linksys WRT54gs router and Linksys WAP54g access point. Using an iPad with both SqueezePad & iPeng for controllers. Transporter => Rotel RC1070 preamp => Rotel RB1080 2 channel amp => Bowers & Wilkins 805 Speakers. Headphone setup: Transporter => Woo Audio WA22 balanced headphone amp => Sennheiser HD800 headphones. ------------------------------------------------------------------------ Squeezed_Rotel's Profile: http://forums.slimdevices.com/member.php?userid=30002 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
