JohnSwenson wrote: > Yes, I am using the same module and SDcard so it should not matter what > carrier board is used. I can't test the wand carier since I have A0. > > I have been thinking it could be SCMS since I have been feeding it into > a EMU-0404USB which is designed to be used as a recording interface, if > the don't copy code is set it might just mute the data, assuming you > are going to be recording the stream. > > Tonight I'll try feeding it into an AVR and see if that gives music. > > Triode, could you also point me to the file the patch is applied to I > can try and see if there are any other status bits that look suspect. > > Thanks, > > John S.
OK, I took a look and the channel status bits look good except for the emphasis, it is including IEC958_AES0_CON_EMPHASIS_5015, I would think that should be IEC958_AES0_CON_EMPHASIS_NONE. I'm not sure what a receiver is going to do when when it receives a stream that says it has emphasis. Many DACs don't include a de-emphasis capability so either ignore the bit or maybe don't play it if they can't handle it properly? For the rare DAC that does include de-emphasis it is going to apply it to everything sent which is not good! John S. ------------------------------------------------------------------------ JohnSwenson's Profile: http://forums.slimdevices.com/member.php?userid=5974 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
