Developers only PLEASE! (There is no need for anyone else to be running
the 3.11 kernels at the moment.)
Lintweaker, can you give me the thumbs-up on your mytek kernel module
working, please?
The rpm is coming, for the moment a tar file.
ssh'd into F19 image.
Code:
--------------------
wget
http://www.communitysqueeze.org/images/wandboard/CSOS/F19-A1/kernel-3.11.0-rc4-armv7-x6.3.tgz
sudo tar zxvf kernel-3.11.0-rc4-armv7-x6.3.tgz -C /
sync
--------------------
You'll need to edit /boot/uEnv.txt. (Bottom of the file. See note.
Uncomment the "uenvcmd=" to support device tree.)
Reboot.... (Or halt, wait 2 mins, power cycle, if you intend to be using
wi-fi.)
NB. The negative feelings I was having towards 3.11 seem to have abated
somewhat with 3.11-rc4. Haven't had a lock-up. No USB issues. USB audio
out, upsampled to 352k8 is working fine now via HUB. I think video out
(HDMI) should be working. Not tested myself, just noticed references in
dmesg which suggest it is being initialised to 1024x768. Not sure EDID
is working. You might want to tinker with video param, for whatever
resolution you require, in uEnv.txt. "video=HDMI-A-1:800x600@60", should
be the syntax according to RN.
------------------------------------------------------------------------
JackOfAll's Profile: http://forums.slimdevices.com/member.php?userid=3069
View this thread: http://forums.slimdevices.com/showthread.php?t=98544
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
