arkadi58 wrote: > thanks for the new versions It seems to have a couple of loose ends. In > the web interface, changes made don't seem to stick. I can set output to > HDMI, "submit", but then when returning to the "Squeezelite settings" > page, there is no check mark for the HDMI radio button. And I am > definitely not using analog, as it says.
Thanks for the bug-report. I hope that the page will now be updated and show your current selection. arkadi58 wrote: > > After making some changes (HDMI, player name), the player would not > restart. The restart option in the 'picoreplayer' tool killed the old > player, but no new one ever got started, not even after a reboot. It was > dead. But after playing with it for a while longer, it suddenly did > restart, and I even got sound out of HDMI. > After the next reboot, no sound. After the next reboot, sound was back. > So HDMI seems to be basically working. Thanks, I found a bug here, so hopefully this is fixed now also. arkadi58 wrote: > There's also a slight useability problem with the web interface: > after choosing 'reboot', the url in the browser window remains at > http://raspi:8077/reboot.cgi. > So after a while you want to see whether it is back and hit "reload", > poof! it reboots again. > Roman Sorry, this behavior has been changed now. ChrisMmm wrote: > Changing the Squeezelite settings to I2S - the "Audio=" setting says it > changes to I2S, at this point restarting Squeezelite gives me audio via > I2s. However it goes back to the default of Analog if you boot. Bit > confusing as "Audio=" is not a documented Squeezelite parm even tho it > stops I2S working if not set. Thanks for the report - this bug is fixed now. CommanderROR wrote: > > Yes, sadly there are quite a few errors in 1.11 > The webinterface is handy, but so far not fully functional. Settings > don't stick like mentioned above. Also, the USB co fig stick doesn't > work for me. > I believe the config file on the FAT partitiom is a better idea anyway > and much more "user friendly" > Looking forward to 1.12...;-) Sorry; I can't find a bug here, it is working fine for me. How are you using this "newconfig.cfg" file option? I'm still trying to decide whether I should go for the FAT partition option. What I like about the USB option is that you quickly can use the same stick in many different piCorePlayer. arkadi58 wrote: > But HDMI isn't working right, it is limited to 48kHz. > With Version 1.06 there was no limit. Could other please test the max HDMI output. I thought that I have patched it so that it should be able to stream HDMI with 192000 kHz Please find the new version (piCorePlayer1.11a at the 'piCorePlayer webpage' (https://sites.google.com/site/picoreplayer/home/news) Steen piCorePlayer a small player for the Raspberry Pi (25MB in RAM). Homepage: https://sites.google.com/site/picoreplayer/home and discussion: http://forums.slimdevices.com/showthread.php?97803-piCoPlayer-Squeezelite-on-Microcore-linux-An-embedded-OS-in-RAM-with-Squeezelite Squeezeboxserver on Voyage Linux 500 MB CF-card (read-only) http://forums.slimdevices.com/showthread.php?90581-HOW-TO-install-squeezeboxserver-on-very-small-Linux-(Voyage-linux) ------------------------------------------------------------------------ sbp's Profile: http://forums.slimdevices.com/member.php?userid=37237 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
