Icelake wrote: > Hello, Hoping someone can point me in the right direction. I have just > started using a rasperry Pi and the piCorePlayer 1.15e. Everything seems > to work but, no sound from the speakers which are connected through the > analog jack. My LMS server recognizes the piCoreplayer. I do have sound > while using Raspberian and openELEC. In openELEC, I needed to change a > setting so that the headpone jack was selected for output. > > Here is output of my config file: > > NAME="piCorePlayer" > OUTPUT=sysdefault:CARD=ALSA > ALSA_PARAMS=80::16:1 > BUFFER_SIZE="" > _CODEC="" > PRIORITY="" > MAX_RATE="" > UPSAMPLE="" > MAC_ADDRESS="" > SERVER_IP="" > LOGLEVEL="" > LOGFILE="" > DSDOUT="" > VISULIZER="" > OTHER="" > AUDIO=Analog > HOST=piCorePlayer > SSID="Cisco04554" > PASSWORD="smiley12" > ENCRYPTION="WPA" > OVERCLOCK="NONE" > CMD=Default > WIFI="on" > > #piCorePlayer version > PIVERS="piCorePlayer 1.15e" > > Thanks for any suggestions
If I power on the raspberry pi after, disconnecting from the monitors dvi cable, the sound from the headphone jack works. I'm very impressed, the sound is good and in sync with both my squeezebox boom and radio. Now I'd like to: 1) Force the raspberry to use the headphone jack even when the dvi cable is connected. 2) Try to use the monitors speakers through the dvi cable. Unless someone wants to point me in the right direction, I'll continue to work through this forum topic. Thanks for the software. ------------------------------------------------------------------------ Icelake's Profile: http://forums.slimdevices.com/member.php?userid=62933 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
