Jesperlykke wrote:
> Muggo...
>
>
>
> Hey... cool...
>
> If you login with putty, and then execute the command "*top*", you will
> see a line near top of screen, where squeezelite shows how much %CPU it
> uses.
>
> Then you can press [CTRL] + [c], and get back to prompt.
> Now, if you just mark that line + right click + copy.
>
> You can then paste that here ! - GOT it ???
>
> Now, if you also execute the command *cat
> /proc/asound/card0/pcm0p/sub0/hw_params* - you can see something
> simulair with this :
>
>
> Good luck... Jesper
>
> Soo... if you can't make it work, just read the %CPU, and paste that
> here... e.g 20% or so?
Here's what it gave me when playing 24/192 Jesper:
Mem total:187380 anon:14632 map:13356 free:94860
slab:12612 buf:10776 cache:45592 dirty:0 write:0
Swap total:41816 free:41816
PID VSZ VSZRW_ RSS (SHR) DIRTY (SHR) STACK COMMAND
1847 2988 476 864 736 864 736 132 -sh
6431 2988 476 868 740 868 740 132 -sh
6459 3036 488 848 708 848 708 132 top
Mem: 92456K used, 94924K free, 0K shrd, 13966272K buff, 13966320K
cached
CPU0: 21.4% usr 35.7% sys 0.0% nic 42.8% idle 0.0% io 0.0% irq 0.0%
sirq
Load average: 0.80 0.74 0.76 2/87 6460
Also:
tc@piCorePlayer:~$ cat /proc/asound/card0/pcm0p/sub0/hw_params
access: MMAP_INTERLEAVED
format: S32_LE
subformat: STD
channels: 2
rate: 192000 (192000/1)
period_size: 3840
buffer_size: 15360
tc@piCorePlayer:~$ tc@piCorePlayer:~$ cat
/proc/asound/card0/pcm0p/sub0/hw_params
-sh: tc@piCorePlayer:~$: not found
tc@piCorePlayer:~$ access: MMAP_INTERLEAVED
-sh: access:: not found
tc@piCorePlayer:~$ format: S32_LE
-sh: format:: not found
tc@piCorePlayer:~$ subformat: STD
-sh: subformat:: not found
tc@piCorePlayer:~$ channels: 2
-sh: channels:: not found
tc@piCorePlayer:~$ rate: 192000 (192000/1)
-sh: syntax error: unexpected "("
tc@piCorePlayer:~$ period_size: 3840
-sh: period_size:: not found
tc@piCorePlayer:~$ buffer_size: 15360
-sh: buffer_size:: not found
tc@piCorePlayer:~$ tc@piCorePlayer:~$
-sh: tc@piCorePlayer:~$: not found
tc@piCorePlayer:~$
tc@piCorePlayer:~$ tc@piCorePlayer:~$ cat
/proc/asound/card0/pcm0p/sub0/hw_params
-sh: tc@piCorePlayer:~$: not found
tc@piCorePlayer:~$ access: MMAP_INTERLEAVED
-sh: subformat: STD
channels: 2
access:: not found
tc@piCorePlayer:~$ format: S32_LE
-sh: format:: not found
tc@piCorePlayer:~$ subformat: STD
-sh: subformat:: not foundtc@piCorePlayer:~$ subformat: STD
Any use?
Regards
Paul
PS I get a noise from the speakers when changing stream format. I'd
like to lose this.
I've tried changing the buffer settings but no improvement. Any
suggestions?
Regards
Paul
------------------------------------------------------------------------
muggo's Profile: http://forums.slimdevices.com/member.php?userid=11514
View this thread: http://forums.slimdevices.com/showthread.php?t=97803
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
