Hi I´ve tried this immage from thesterk.com and everything was working fine.
Since i tried to edit some modes (don´t want to see the remain a.s.o) everything is fine. But somewhere in the editing of the readsq.py I made a big mistake and the Display won´t work any longer. So I tried everything from start (burn new Image to the SD, update picore to 1.19 as I´ver done before) but I didn´t get the Display back to work. I use Raspberry B, and have a 2nd HW setup that have worked before by changing the SD from one raspy to another (both have a display connected and both worked as i first tried everything) I have no glue what´s going wrong since both setups already worked, so the wiring is OK. When booting I can see a dimmed backlight, first line transparent as it should be, but when picore is up and running the backlight doesnt switch on and no char. are shown. Manually switching on the backlight by wire is ok, but still noch characters visible. Squeezelight is running since i can hear music with the analog output or HiFiBerry AMP. Tried with update picore and without... Could it be that there is some stored on the Raspy Hardware? ------------------------------------------------------------------------ Harryl89's Profile: http://forums.slimdevices.com/member.php?userid=62905 View this thread: http://forums.slimdevices.com/showthread.php?t=101269
_______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
