wijnand wrote: > Hey There, > > A few days ago I bought a raspberry pi2 and a hifiberry amp+. In 2 > minutes all installed and running. > > After much searching and testing, i did not managed to make a simple > status LED that indicates whether squeeze lite active or not. > A simple LED between pin 2 or 6 is not satisfactory. > > I already tried to install picorelcd.img and then connect a LED between > pin2 and pin11 (used for the backlight) but this did not help. > Someone with a simple solution?
Hi wijnand, I think you need to add a few more details of exactly what you want. What does "squeeze lite active or not" mean? Squeezelite running on RPi or Squeezelite playing/paused. Are the pins you are talking about the RPi GPIO pins or does the Hifiberry amp+ have pins for leds? BTW: You always need a resistor is series with the LED to set the current. The RPi doesn't have them standard, maybe the hifiberry amp+ does? A simple solution is only possible if you know programming and electronics, ;) then it is very simple. regards Greg ------------------------------------------------------------------------ Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=103342 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
