ClemsonJeeper wrote: > Hello all, > > Here's my setup: > > Raspberry pi 2 with a powered (4Amp) USB 2.0 Hub. I have 4x of these > guys (Syba SD-CM-UAUD USB Stereo Audio Adapter): > > http://www.amazon.com/gp/product/B001MSS6CS?psc=1&redirect=true&ref_=od_aui_detailpages00 > > plugged into the Hub. I have Raspbian installed and have created an > init script to start up 4 instances of squeezelite. > > The first 3 fire up just fine, but the 4th always locks up the RPi2. I > was thinking either a couple things : squeezelite exhausting all the RAM > on the device, or it overdrawing current from the Pi. > > > Code: -------------------- > > > /usr/bin/squeezelite -z -o front:CARD=Device,DEV=0 -n Kitchen -m "00:00:00:00:00:01" > /usr/bin/squeezelite -z -o front:CARD=Device_1,DEV=0 -n Basement -m "00:00:00:00:00:02" > /usr/bin/squeezelite -z -o front:CARD=Device_2,DEV=0 -n Bathroom -m "00:00:00:00:00:03" > /usr/bin/squeezelite -z -o front:CARD=Device_3,DEV=0 -n Backyard -m "00:00:00:00:00:04" > -------------------- > > > > The overdrawing of current doesn't seem feasible since the sound cards > are all on a separate powered USB hub, and running out of RAM doesn't > seem to be the case since squeezelite doesn't seem to be consuming > much RAM per instance (according to free). > > Any ideas? I don't see anything in the Rpi2 logs (no kernel panics or > anything), it just freezes completely. I have to hard reboot the RPi2 > in order to get it back up and running.
Maybe increase the USB power on the pi2 to max? try a different hub? ------------------------------------------------------------------------ Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=104049 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
