Found out you can set the filter on the command prompt like this: sudo amixer -c 1 set 'DSP Program',0 'FIR interpolation with de-emphasis'
choices: 'FIR interpolation with de-emphasis' 'Low latency IIR with de-emphasis' 'High attenuation with de-emphasis' 'Ringing-less low latency FIR' Can this be set in the squeezelite alsa controls somehow? skikirkwood wrote: > I believe if you click on the "Beta" tab at the bottom of piCorePlayer > and then click on the top "Tweaks" tab you can scroll down and see the > "User commands" section. You should be able to put any Linux command > line in there, and it will be executed as part of the player's startup > procedure. Good idea! Works fine setting it through the user commands, Thanks! CiAudio VDC-SB - raspberry pi b+ hifiberry digi+ (BNC added, removed TOSlink, HDMI disable) piCorePlayer (play song from RAM) --> Use as controller/desk/reference: Touch (EDO / displayoff plugin, linear power, removed analog coupling caps, removed TOSlink & resistor, added spdif isolation transformer & bnc jack ) PSAudio TRIO C-100 (Cullen III, IcePower 300ASC's) - DL3 DAC (Cullen IV) - Energy Veritas w/Mundorf/Erse Xovers - 2x MartinLogan Descent i - Dectet - Cardas - BlackCat XV-Ultra ------------------------------------------------------------------------ sckramer's Profile: http://forums.slimdevices.com/member.php?userid=20311 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
