paul- wrote: > When troubleshooting VU meters. The number one reason is that you > changed network interfaces......loaded Jivelite on ethernet, then > changed to wifi.
I installed from Ethernet and never switched to or used wifi. paul- wrote: > > Otherwise, vu meters only working if jivelite is running on the same > rpi that is running squeezelite. That is the case in my situation. paul- wrote: > > 1) On the squeezelite page, all the way at the bottom. Expand the more> > And make sure there is a -v at the end of the line.....if so then > Jivelite properly enabled VU meteres. > Yep, I'm using the -v option. paul- wrote: > > 2) Make sure you are using the Joggler skin, or Grid Skin (800x480) > 3) Make sure you have not removed the VU meters from the Now Playing > rotation. (Settings | Screen | Now Playing | Now Playing Views) > 2 and 3 are correct in my situation. paul- wrote: > > 4) If that still doesn't work, make sure everything other than jivelite > is fully configured, then press the reset button. This will reset your > jivelite setup. After the reset, select one of the above listed skins, > then check your VU meters. > I will give this a try later. 'Cambridge Audio 851D-S' (https://www.cambridgeaudio.com/products/851/851d) -> 'Focal MP1200' (http://www.mp1200.co.nf/) -> 'Focal Electra 1028 Be' (http://www.focal.com/en/electra-1000-be-2/209-electra-1028-be-3544053695099.html) 1 x SB Boom, 1 x SB Radio, 1 x SB Touch and 2 x RPI 2B 1 x SB3 and 1 x SB Touch in storage ReadyNAS NVX running LMS 7.9.0. iPeng on iPhone, SqueezePad & iPeng on iPad. http://www.last.fm/user/phibon ------------------------------------------------------------------------ Pascal Hibon's Profile: http://forums.slimdevices.com/member.php?userid=7969 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
