Just found out that while the share mount survived 12 hours with the
autoreconnect-1 etc change the netwerkshare mount did not get
reconnected when i rebooted the pi. So still there is something not
allright.
Now for your question.

I've got an older WXP system that is only being used as
fileshare/domotica/LMS/music ripping station "server" bit i disabled LMS
at this moment via wired network. Will be replaced, but not at this
moment.
A Pi3 with PiCorePlayer 3.20 on which LMS is enabled and Squeezeplayer
is disabled, via wired network (no wifi)
one LaCie drive that is in use for backup of XP station. Temporarily is
created a share with some music files for testing networkshare mount.
one W7 system that is in use as workstation, wired network. Normally no
shares but for testing this problem i created a share just as on the
Lacie.
At the moment of testing all connected via a single "dumb" netgear GS116
(10/100/1000 16p switch)

The linux lacie box => no problem, share stays connected even when
rebooting pi.
The XP and W7 box => disconnect problem after a while not using the
share but this seems to be solved with the autoreconnect-1 etc
modification. Does not survive with pi reboot

So when the pi has a reboot i have to go to the lms tab, change ip adres
for the share mount to the ip adres of the lacie (with temp share), and
click on the "Set NET Mount". return to main page, and change ip adres
to XP box and click on the "Set NET Mount". Then the network mount works
and keeps on working (due to the autoreconnect change) until the pi
get's rebooted. If i do it different i get the notification nothing
changed and the mounting point is not refreshed.

Somehow, somewhere the mounting process during pi boot is different
compared to the manually "Set NET Mount" which causes the mount to fail
after reboot.



*SqueezeBoxes:* 2x SB2 (Living room and study), 1x Radio (Kitchen), 1x
Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden)
1x OSMC + Squeezelite (Movie room), 1x Touch (Bedroom)
*Server:* LMS1 7.7.3 on windows, LMS2 7.9.1. on PcP 3.20
*Network:* AVM Fritzbox, D-Link Smart Switch 24p, 3x Ubiquity
------------------------------------------------------------------------
edwin2006's Profile: http://forums.slimdevices.com/member.php?userid=66926
View this thread: http://forums.slimdevices.com/showthread.php?t=107720

_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix

Reply via email to