re: enc28j60 setup I've made a bit more progress. The module does work in pCP. Using ifconfig I can get the module on the LAN, but only in a limited fashion. If I add "ifconfig eth0 up" to /opt/bootlocal.sh the link is reported to be up in dmesg, but it still doesn't work. The startup reports "No network found!" and it can't see or be seen on the LAN. If I make the command in the script "ifconfig eth0 <ip address> up", the start up still reports "No network found!", but it is reachable from local computers at that ip address and it can ssh out to local computers. It does not have access to the internet though, so it can't for instance see the picoreplayer repository. Clearly it doesn't know who is in charge of dns and probably lacks other info it would receive if handshaking had been established properly.
IIUC, ifconfig has no way of initiating a dhcp request to the router. What is responsible in pCP for reaching out to the router to request an IP address with other types of network adapters? In the standard linux world you could use dhclient and /etc/network/interfaces to help with the configuration. How is this handled in picoreplayer? Thanks again for your help and patience! SqueezeServer: LMS7.9.1 on Debian-Stretch Wholehouse Audio: Squeezebox Receiver (Duet), 3 Squeezebox Controllers Extra Controllers: Orange Squeeze Android App, SqueezePlay Front Porch: piCorePlayer 3.21 on Raspberry Pi Model B with HiFiBerry DAC Patio: piCorePlayer 3.21 on Raspberry Pi 2B with HiFiBerry DAC Garage: piCorePlayer 3.22 on pIZero1.3 with pHat DAC, Jivelite, 3.5" TFT LCD Future Plans: Pi3's and PiZeros with touchscreens and DACs Retired: Wandboard with CSOS, WHS SqueezeServer ------------------------------------------------------------------------ rmac321's Profile: http://forums.slimdevices.com/member.php?userid=58482 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
