geiserc wrote: > I've installed pCP (tried 3.5.0 and 3.2.2) and cannot get sound out of > my RPi 3 with IQaudioIO with DAC+ and AMP+. Here's what I've tried so > far: > 1. In the Squeezelite Settings of pCP I've set the Audio output device > to IQaudioIO DAC+ and made no further adjustments in the Squeezelite > Settings. > 2. I've saved and rebooted. > 3. I've checked that config.txt lists 'dtoverlay=iqaudio-dacplus' at the > end of the file. > 4. I've disabled the onboard audio and verified config.txt has > '#dtparam=audio=on'. > > I've started from a fresh SD card tried multiple times - no luck. Any > tips on getting this audio card to work? > > Thank you!
I have pCP working with an IQaudioIO DigiAMP+ and I think the config for the AMP+ is similar - the default setting on the AMP+ is to be muted on power-up. Is the mute LED on your AMP+ on or off? If you look at section 15 of http://www.iqaudio.com/downloads/IQaudIO.pdf, you need to have either Code: -------------------- dtoverlay=iqaudio-dacplus,unmute_amp -------------------- or Code: -------------------- dtoverlay=iqaudio-dacplus,auto_mute_amp -------------------- added to config.txt. ------------------------------------------------------------------------ kmccourt's Profile: http://forums.slimdevices.com/member.php?userid=3815 View this thread: http://forums.slimdevices.com/showthread.php?t=109009 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
